Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: Shooting High Left  (Read 737 times)

Offline rdrace

  • Trad Bowhunter
  • **
  • Posts: 3
Shooting High Left
« on: February 11, 2008, 10:37:00 AM »
I finally got my arrows shooting perfect bullet holes thru paper all the way to 20 yards. I shoot carbon arrows that weigh 482 grains at 30.5" and shoot a right handed 55lb Bear Montana long bow. This is my problem I shoot three fingers under and when I aim down the arrow which seems to work for me I shoot high left all the time if I aim 5" over and 6" down or at 5 o'clock and then I hit buyeyes. If I aim at a deer target I have to aim under the belly to hit the heart at 20 yards. But at 10 yards I aim dead on and it hits dead on. I don't know if it a form issue because I know with my compund problem become larger at further distance. Is this normal or does anybody have an idea what I might be doing wrong

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8261
  • Contributing Member
Re: Shooting High Left
« Reply #1 on: February 11, 2008, 05:10:00 PM »
You might be left eye dominant.  When you aim down the arrow, you might think your right eye is doing the aiming, but it may be your left.    Try closing your left eye and see what happens.

  • Guest
Re: Shooting High Left
« Reply #2 on: February 14, 2008, 09:32:00 PM »
I don't shoot well enough and my release isn't crisp enough to paper tune my recurves and longbows. Any arrow should make a bullet hole at 15 to 20 yards no matter how terrible the bow/arrow is tuned. I have to bare shaft tune my bows.

Nothing wrong with the distance. Your gap would be less at 10 than 20.  The right/left issue could be many things; arrow not directly under your eye; arrow too stiff, and other things as well.

If you find your point-on distance, you can easily plot your gap from zero to that point-on distance.  At 1/2 of your point-on distance you can measure your widest gap and plot it from there.

Jim

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©