Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: 35# set ups for 3d  (Read 504 times)

Offline Cecil

  • Trad Bowhunter
  • **
  • Posts: 214
35# set ups for 3d
« on: February 23, 2009, 05:36:00 PM »
Anyone use one around 35# and what is your set up? arrows points, fps any info thanks.

Offline seany916

  • Trad Bowhunter
  • **
  • Posts: 14
Re: 35# set ups for 3d
« Reply #1 on: February 23, 2009, 08:43:00 PM »
What kind of bow are you shooting?

Draw length?

Is that 35# @ 28" (some bows are marked at other draw lengths)

What kind of string are you using?

Brace height?

Offline Skinny Little Runt

  • Trad Bowhunter
  • **
  • Posts: 67
Re: 35# set ups for 3d
« Reply #2 on: February 23, 2009, 09:11:00 PM »
Cecil, I target shoot lite wt because they're already dead! If you can get the arrow there and have it stick, thats a good setup. Here's one of mine. Das Elite(21'riser) with Winex limbs pulling 32# @ 27.5" true draw. Arrows for 30yds and under are ACC 328, full length w/145points.
3 fletch, 4.5' shields, total wt 423gs.
Gap shooting, point on is 30yds. Speed,I havent checked, maybe 150fps.
Last indoor 3D, 300 point total, I shot 235. Not bad for a kid.%>)
Remember you can shoot 100yds with 38#s easy.
"It ain't over till it's over"....

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©