3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Carbon Limb Failures?  (Read 501 times)

Offline flint kemper

  • Trad Bowhunter
  • **
  • Posts: 837
Carbon Limb Failures?
« on: November 15, 2007, 03:36:00 PM »
I was wondering how many carbon limb failures there have been in all the carbon limbed bows being made? I know the warranty is usually less with bowyers who build both glass bows and carbon limbed bows. Is there not enough data as to how long these limbs will last with the carbon front and back. Are these bows on the verge of exploding everytime you shoot them because of the carbon. I have had and shot carbon limbed bows as well. I don't want an argument just thoughts. Thanks Flint

Offline bmfer

  • Trad Bowhunter
  • **
  • Posts: 514
Re: Carbon Limb Failures?
« Reply #1 on: November 15, 2007, 06:09:00 PM »
I hope they don't blow up, I was thinkin' about getting one
Bret M. FullER

Offline Danny Rowan

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4343
Re: Carbon Limb Failures?
« Reply #2 on: November 15, 2007, 07:58:00 PM »
O.L. has been building them for years and I have never heard of one blowing up. I have heard of some of the Black Swans blowing up.

Danny
"When shooting instinctivly,it matters not which eye is dominant"

Jay Kidwell and Glenn St. Charles

TGMM Family Of The Bow
NRA Life/Patron member
NAHC life member
Retired CPO US Navy 1972-1993
Retired USCBP Supervisory Officer 1999-2017

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: Carbon Limb Failures?
« Reply #3 on: November 15, 2007, 08:10:00 PM »
Flint,

Top-end FITA limbs have been made with outter laminations of carbon for years now. And I'd be willing to bet those guys run a lot more arrows through their bows than most bowhunters do.

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Carbon Limb Failures?
« Reply #4 on: November 15, 2007, 08:39:00 PM »
Some blow up from on all of them. Materials have flaws and limbs are under incredible stress. New materials have helped to greatly decrease the chances of it happening though.

 
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: Carbon Limb Failures?
« Reply #5 on: November 15, 2007, 11:30:00 PM »
Buy from a reputable bowyer who has a history of working with carbon-like OL Adcock and ACS Archery-and you will be fine.

Offline BamBooBender

  • Trad Bowhunter
  • **
  • Posts: 772
Re: Carbon Limb Failures?
« Reply #6 on: November 16, 2007, 01:02:00 AM »
VM, does that bow stack like crazy at 45" of draw? lol
Experience is something you don't get until just after you need it.

Goodbye Shiner you were always a good dog.

Offline ZaneD

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 391
Re: Carbon Limb Failures?
« Reply #7 on: November 16, 2007, 06:50:00 AM »
I had a Double Carbon Centaur blow up about two feet away from me at a 3-D shoot. the Back if the limb let go just above the bottom tip. But Centaur sent my buddy a new bow in about a month. I step back a little more now!!

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Carbon Limb Failures?
« Reply #8 on: November 16, 2007, 08:37:00 AM »
It pulls 2.5#s an inch out to 36", didn't see much reason for measuring after that.    :scared:
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline hunt it

  • Trad Bowhunter
  • **
  • Posts: 2622
Re: Carbon Limb Failures?
« Reply #9 on: November 16, 2007, 09:30:00 AM »
Any bow that pushes the limits that contains carbon is going to have a percentage blow up.

If you push the threshold it will push back from time to time. I witnessed an ACS blow up last year.
hunt it

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Carbon Limb Failures?
« Reply #10 on: November 16, 2007, 09:33:00 AM »
Carbons problems lay in compression, it is not a good core/belly material. It excels as a back material though for it has incredible stretching capabilities, As bowyers learn more and more about the materials and new ones, incredible things are being done.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©