Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: grip question  (Read 853 times)

Offline spike buck

  • Trad Bowhunter
  • **
  • Posts: 107
grip question
« on: October 10, 2009, 07:50:00 PM »
Hopefully someone can chime in with a solution to this. Occasionaly my arrow hits the sideplate and leaves a scuff mark on the arrow wrap. It is also a louder shot. I have experimented with many shafts and I am sure I have the correct spine. I am thinking it is my grip or bow arm position. It doesn't happen every shot, but I must be doing something to cause my arrow to hit the plate. I am shootng a great plains t/d 56 @ 28, 28" draw, three under, mfx 400's 29" long, 225/250 up front. This has to be a form problem but I don't know what to do. Thanks in advance..

Offline Mike VanBuren

  • Trad Bowhunter
  • **
  • Posts: 239
Re: grip question
« Reply #1 on: October 10, 2009, 07:59:00 PM »
Maybe your string nock point is too low?

Offline BernieH

  • Trad Bowhunter
  • **
  • Posts: 86
Re: grip question
« Reply #2 on: October 10, 2009, 08:21:00 PM »
You may be torquing the bow with your grip. Loosen your grip on it and see if that helps. You might also be plucking the string as you release.
Bernie

Offline HATCHCHASER

  • Trad Bowhunter
  • **
  • Posts: 1215
Re: grip question
« Reply #3 on: October 10, 2009, 08:37:00 PM »
Torquing the bow.  If you are right handed you probably hit left.  Try twisting your hand around to the left on the grip.  Hold the throat of the grip in the base of the thumb more.
It's not the arrival, it's the journey.

Offline highPlains

  • Trad Bowhunter
  • **
  • Posts: 387
Re: grip question
« Reply #4 on: October 10, 2009, 08:39:00 PM »
When I have this problem it is almost always because of my release.
>>---> TC
Rocky Mountain Specialt

Offline bowmofo

  • Trad Bowhunter
  • **
  • Posts: 860
Re: grip question
« Reply #5 on: October 10, 2009, 10:38:00 PM »
If you don't hit anchor or hit full draw the arrow will act over spined
KEEP IT SIMPLE!

Offline lpcjon2

  • Trad Bowhunter
  • **
  • Posts: 7667
Re: grip question
« Reply #6 on: October 20, 2009, 04:16:00 PM »
Use seal skin on the shelf and bring it up an inch on the plate side this will help if you hit it again. And always continually check your form.
Some people live an entire lifetime and wonder if they have ever made a
difference in the world, but the Marines don’t have that problem.
—President Ronald Reagan

Offline NW Jamie

  • Trad Bowhunter
  • **
  • Posts: 175
Re: grip question
« Reply #7 on: October 20, 2009, 06:25:00 PM »
Sounds like a lot of good suggestions above. One thing that I do when the bow and the arrow just are not working right is to nock the arrow with the cock feather opposite the way you were shooting, if you have the cock feather out then switch to cock feather in. Some bows just seem to want to shoot some arrows that way, good luck.
Regard’s,
Jim

Offline wingnut

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 6179
Re: grip question
« Reply #8 on: October 20, 2009, 06:38:00 PM »
Yep overspined on that shot will cause the arrow to slap the riser.  Happens too me if I short draw.

I always like to be a little lighter in spine to help that situation.

Try a little more point weight and see if it clears up.

Mike
Mike Westvang

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: grip question
« Reply #9 on: October 20, 2009, 06:52:00 PM »
Quote
Originally posted by wingnut:
Yep overspined on that shot will cause the arrow to slap the riser.  Happens too me if I short draw.

I always like to be a little lighter in spine to help that situation.

Try a little more point weight and see if it clears up.

Mike
Couldn't agree more, I would say that you're right on the limit for your arrow spine. If you'd left them an inch longer you'd be fine. Another 100gn up front will help.
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline mustoffa

  • Trad Bowhunter
  • **
  • Posts: 51
Re: grip question
« Reply #10 on: October 28, 2009, 08:01:00 AM »
Id loosing your grip sound like you might be torguing the bow .dose it happen when shooting a lot.might be getting tired and gribbing bow tighter also check for stiff arrow adding weight to tip sound good to
vernon thompson

Offline spike buck

  • Trad Bowhunter
  • **
  • Posts: 107
Re: grip question
« Reply #11 on: October 28, 2009, 10:28:00 AM »
thanks for the replies. I loosened my grip and now they fly great...I was torquing the bow.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©