Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: nock height for three under  (Read 609 times)

Offline babs

  • Trad Bowhunter
  • **
  • Posts: 750
nock height for three under
« on: August 04, 2010, 01:47:00 PM »
I was wondering what nock height you guys use for shooting three under, and with just a rug rest. I just use a piece of velcro for by rest plate. Does 1/2" seem to high. I shoot my bare shaft at 20 yards they go right where I'm aiming Just a little nock left. I just gotta trim them down a little and try again.
Border tempest hex 7
Border tempest 25 hex 6.5
L.H.A Hayestani Combo 47lbs @28
Bob Lee camo dipped 47lbs @ 29
Bob Lee Heavyweight 50@29
Stewart 3pc Slammer. 45@28
Hoyt GMX & RCX 1000 limbs

Online McDave

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6086
Re: nock height for three under
« Reply #1 on: August 04, 2010, 02:07:00 PM »
If you're getting good bare shaft flight, that's your answer.  Most folks use a higher nock point for 3 under than 1/2".  I nock the arrow under the nock point, and my bows tend to need a nocking point between 5/8" and 3/4", depending on the results of bare shaft testing.

If you find your arrows hitting higher than you're looking, feel free to move the nock point up a little, as that will cause your point of impact to move down.  You generally have more room to move the nock point up than down before you get erratic arrow flight.
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

Offline Big Bird

  • Trad Bowhunter
  • **
  • Posts: 324
Re: nock height for three under
« Reply #2 on: August 04, 2010, 02:51:00 PM »
what McDave said.I have 35 bows and shoot 3 under,all between 5/8 and 3/4

Offline Winterhawk1960

  • Trad Bowhunter
  • **
  • Posts: 1311
Re: nock height for three under
« Reply #3 on: August 04, 2010, 03:45:00 PM »
Like McDave said......."If you're getting good bare shaft flight". I seem to be in the minority, but my nock point on all my bows are 1/2 inch.......and some even less. I shoot three-under and I think it has to do with your specific release.

Winterhawk1960
What if you woke up tomorrow, with only what you thanked God for today ???

Offline Dave Thaxton

  • Trad Bowhunter
  • **
  • Posts: 378
Re: nock height for three under
« Reply #4 on: August 04, 2010, 04:04:00 PM »
All of my bows are set at 1/2 to 5/8 except for a Breeding T/D recurve. It is set at flush or 90 degrees. Makes no sense to me but the arrows come off like a guided missle.
64"55@28 Kohannah Flatbow
60"53@28 Robertson Peregrine
68"45@28 Howard Hill Redman

Offline ishoot4thrills

  • Trad Bowhunter
  • **
  • Posts: 3445
Re: nock height for three under
« Reply #5 on: August 05, 2010, 08:33:00 PM »
McDave is all over this one. What he said was what I was thinking and applies to my setup.
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

Offline babs

  • Trad Bowhunter
  • **
  • Posts: 750
Re: nock height for three under
« Reply #6 on: August 06, 2010, 01:27:00 AM »
thanks guys I'll give that a try
Border tempest hex 7
Border tempest 25 hex 6.5
L.H.A Hayestani Combo 47lbs @28
Bob Lee camo dipped 47lbs @ 29
Bob Lee Heavyweight 50@29
Stewart 3pc Slammer. 45@28
Hoyt GMX & RCX 1000 limbs

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©