Whats your arrangement of BH's in your bow quiver??

[Predator1]

I just picked up a new Eagles Flight 4 arra quiver. Man, what a nice piece of work! I have never used a bow quiver so this will be new to me. Just wondering if you guys have any pics of how you have arranged your BH's in your quiversa for max room? I am shooting Zwickey Deltas.  Thanks !

[Shawn Leonard]

I use a strap on Boa and it is a 6 arrow quiver. I place the judo in the last slot that sit on the outer edge of the quiver and than 3 Snuffers. This leaves a space between all the arrows and the fletchess do not touch this way so they do not make any noise. Shawn

[pseman]

Ditto what Shawn said. I carry 4 STOS and just make sure that the fletchings don't rub each other.

Mark

[drewsbow]

I have a four arrow Boa and put two heads in at the top and two at the bottom :0)

[Terry Green]

Here's my Eagle's Flight 4 arrow....I 'drew in' the 4th arrow that was used to kill the deer, and its slides in underneath the other one at the same angle.....there's 3 Sasquatches and one Sirocco in there.  

The head on the left is not shoved in as far as it should be, I had that arrow knocked as I tracked the deer, and hastily put it away when I found the buck.

   

[fredbear92]

I might get one of those sometime. I'm not very happy with my boa

[brmize]

I've got a slide on Selway on my Viper deluxe. I go with 3 160gr STOS on 42gr alum. adapters. Then 1 dull 145gr Steel Force on 100gr adapter(squirrel arrow) then 1 135gr judo on 42gr adapter. That is order from inside to outside. Stos' and Judo are on Easton Legacy 2020's and the Steel Force is on a Carbonwood 5000.

Brian