Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: tuning  (Read 807 times)

Offline ESP

  • Trad Bowhunter
  • **
  • Posts: 652
tuning
« on: May 13, 2016, 04:50:00 PM »
After 11 months of shoulder rehab I am shooting again.  I got much lighter limbs 51 at my 30.5 DL. I am shooting 400 gold tip blems, full length and 145 grn fp.  Bare shaft are flying way nock left and hitting way right of the target.  The arrow is almost side ways on impact at 28 yards.  With fletching I still get a fish tail and my arrows hit right of target. Suggestions?

ESP   :help:

Offline moebow

  • Trad Bowhunter
  • **
  • Posts: 2509
Re: tuning
« Reply #1 on: May 13, 2016, 06:32:00 PM »
Yes, get your "shooting legs" back under you.  I'm willing to bet that your arrow flight is mostly YOU if you are just starting out again after a shoulder injury.

I know you must be Atlas himself if 51# limbs are "much lighter" but give yourself a chance to re-acquire your shot.

Arne
11 H Hill bows
3 David Miller bows
4 James Berry bows
USA Archery, Level 4 NTS Coach

Are you willing to give up what you are; to become what you could be?

Offline ESP

  • Trad Bowhunter
  • **
  • Posts: 652
Re: tuning
« Reply #2 on: May 13, 2016, 07:00:00 PM »
Arne, I kind of figured it was me.  I have been watching your videos on youtube.  I never had a good release and still not figured out the rotational draw.

Online McDave

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6085
Re: tuning
« Reply #3 on: May 13, 2016, 08:32:00 PM »
OTOH, you don't have anything better to do.  Cut a shaft back to 31.5 and try it with a 125 grain point.  You should show some improvement in nock left if it is a true weak shaft (I assume you are a RH shooter?).  If there is no improvement, then Arne is probably correct (he usually is).
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©