Author Topic: A little broadhead trading ? (Read 2735 times)

D.Sheppard · « **on:** June 13, 2009, 02:26:00 PM »

Every time a old head shows up there is alot of interest in it so I know quite a few of you guys are hoarding...I mean collecting old heads.

I was wondering if any body would be interested in starting up a broadhead trade thread to try to rekindle some friendly trading between collectors in this buy and sell *-bay world, that is if it doesn't violate TG policy.

Maybe post a pic of a few heads you have for trade or list a few you are on the prowl for. Keep it small, keep it simple, keep it fair and everyone wins.

Just a thought and if it doesn't work no harm no foul.
Thanx, Shep

Chuck Homitz · « **Reply #1 on:** June 13, 2009, 07:20:00 PM »

I'M INTERESTED DON

mwmwmb · « **Reply #2 on:** June 13, 2009, 08:06:00 PM »

this is something i am interested in getting started in.

D.Sheppard · « **Reply #3 on:** June 13, 2009, 08:22:00 PM »

I know that alot of the big boys are packed up for Comptons but I doubt anything would come up that they need. They can still play though.
Would be good for the guys fairly new to collecting heads.

NW Jamie · « **Reply #4 on:** June 13, 2009, 09:27:00 PM »

I would like to start a small colletion based on Bear broadheads; so count me in the fun.

D.Sheppard · « **Reply #5 on:** June 13, 2009, 10:59:00 PM »

Here are a few to get it going.
Up for trade :
*Blood Trail .65 vent - #0260.000
*B-1 Tanged Herpin - #0601.000
*Stemmler Deerslayer - #1208.000
*Silencer Mark IV Integral Shaft - 1141.000 (complete arrow)

Interested in :
*Jerry Hill 1 Pin - 0746.010
*Tanged Eagle Talon - 0444.000
*Need some big heads 200gr. plus
*Copperhead Bow-Fin
*Fleetwood Western - #0487.000
*Ex-Caliber - #0460.000
*Fal-Con
*Open to ideas/suggestions

Thanx, Shep

TonyW · « **Reply #6 on:** June 14, 2009, 12:00:00 AM »

I'm getting ready to go camping this week, but I will be checking in on this.

TonyW · « **Reply #7 on:** June 14, 2009, 12:01:00 AM »

PS

Does this make me a member of "Trade Gang" now?

bowhunterfrompast · « **Reply #8 on:** June 14, 2009, 02:49:00 AM »

I'm interested..I have a small collection I started over 20+ years ago. Will check and see what I have to trade..if anything.

JavelinaHink · « **Reply #9 on:** June 14, 2009, 07:03:00 AM »

Shep......good idea...once I get to Compton next week I'll get some pic's out. Anyone that can join the ABCC I can send out a bunch of heads to get them started also...there are well over two thousand different kinds of glue-on Broadheads on our clubs list right now......lots to collect....Hink..

R.V.T.B. · « **Reply #10 on:** June 14, 2009, 11:03:00 AM »

I have a couple spare Copperhead rippers. PM a mailing address and I will send ya one. When you get it if you like it you can send me the Herpin back.

D.Sheppard · « **Reply #11 on:** June 14, 2009, 11:24:00 AM »

Let the trading begin !
PM coming your way Randal
Thanx, Shep

Chuck Homitz · « **Reply #12 on:** June 15, 2009, 09:11:00 AM »

I HAVE SOME KOBRA X-CALIBRE 2 BLADE HEADS I JUST PICKED UP. SOME HAVE SCREW IN INSERTS INSTALLED AND SOME DON'T. NOT SET UP TO POST PICS ON HERE. IF INTERESTED LET ME KNOW BY WED EVENING. LEAVING FRI MORN FOR COMPTON.

TRAP · « **Reply #13 on:** June 15, 2009, 09:49:00 PM »

I want to play, but I don't have any heads to trade :(

Got other "junk" LOL

Trap

D.Sheppard · « **Reply #14 on:** June 15, 2009, 09:51:00 PM »

pics up for Mr. Homitz

D.Sheppard · « **Reply #15 on:** June 15, 2009, 09:56:00 PM »

I had not heard of Kobra X-calibre 2 blade.

Looks like a Hilbre ferrule and a Arrowmate blade

What kind of bleeder goes in it to make it a 4 blade ?

Chuck Homitz · « **Reply #16 on:** June 16, 2009, 09:25:00 AM »

SHEP, IT COULD VERY WELL BE AN ARROWMATE BLADE BUT ITS NOT A HILBRE FERRULE. IN FACT ITS STAMPED KOBRA AND X-CALIBRE. THEY HAVE 2 DIFFERENT BLEEDERS. ONE IS LIKE ANY NORMAL BLEEDER AND ONE IS A REVERSE BLEEDER--SOMETHING LIKE THE INDIAN. THE BLEEDERS ARE VERY SMALL. THEY DO COME JUST AS 2 BLADES BECAUSE I HAVE A BOX OF SIX NEW HEADS THAT ARE 2 BLADES AND IT TELLS YOU THERE ARE 2 DIFFERENT BLEEDERS IF YOU PREFER A 4 BLADE HEAD.

mullet · « **Reply #17 on:** June 17, 2009, 08:56:00 PM »

This is a cool Idea. Jave'how do you join the ABCC? I only have a few old ones, a lot of Bears and I've tried to corner the market on Pearson Deadheads.

Chuck Homitz · « **Reply #18 on:** June 18, 2009, 11:34:00 AM »

MULLET. PM SENT ON ABCC INFO

mullet · « **Reply #19 on:** June 19, 2009, 11:36:00 PM »

Chuck, Like a DA I accidently deleted it before I wrote it down. But Thanks.

News:

Author Topic: A little broadhead trading ? (Read 2735 times)

Users currently browsing this topic: