Bear replacement Brush rest

[dkard]

Anyone selling replacement brush rest that go into the sight plate on the bear TD's/tamerlanes etc.

thanks dave

[Bjorn]

Joe St. Charles used to have them.

[dkard]

Thanks, I will have to check that out.

dave

[Ron Bushong]

Dave,

You can also cut your own from one of the new molded Para-rest brush rests, available from 3rivers, Joe St. C, and others (about $3.50 ea).  The brush portion isn't quite a long as that on the original Bear rest, so it won't quite fill the entire length of the slot in the sight plate, but they work very well - especially if you can't find an original.  Just take your time cutting the molded plastic of the Para-rest in a wedge shape (along the top and bottom of the brush itself), and then feed it through from the back side of the sight window plate and press it in place.  I have replaced all of my original Bear brush rests with these modified Pararest replacements so that I don't wear out the originals.

Ron

[bow'narrow]

Made a brush rest for my Tamerlane from a single bristle row of a toothbrush.  Works great.

[johnnyrazorhead]

Dave,
 I probably have one around here if you still need one you can e-mail me your address and I'll get one out to you.  John