INFO: Trad Archery for Bowhunters



Author Topic: riser repair- glue question  (Read 441 times)

Offline mahantango

  • Trad Bowhunter
  • **
  • Posts: 1384
riser repair- glue question
« on: September 18, 2010, 07:43:00 AM »
I was given a longbow with a joint failure between the accent strip and the grip build-up on the belly side. I want to inject CA and clamp to try to save the bow. My question is: where do you guys get syringes that will work with CA and how do you get the glue into the syringe before it sets up?
We are all here because we are not all there.

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: riser repair- glue question
« Reply #1 on: September 18, 2010, 10:03:00 AM »
Can't help with a source but the glue will not set up in the syringe.  Just don't dilly dally with it when you load it.
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Offline portugeejn

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 895
Re: riser repair- glue question
« Reply #2 on: September 18, 2010, 11:37:00 AM »
I don't know about the setting up, as it just doesn't-don't know how it works.  I use Loctite 420 (the real thin watery stuff).  I don't know if the thicker on the shelf stuff would work with a syringe.

As far as the syringes go, I use Insulin syringes that diabetics use.  I have a friend who gave me a few.  

RonP

Offline bctgrad

  • Trad Bowhunter
  • **
  • Posts: 137
Re: riser repair- glue question
« Reply #3 on: September 18, 2010, 01:35:00 PM »
Check with your local pharmacy and make sure you tell them what you want to use them for.  My wife is a Pharmacy Tech and got me mine.  She said that most pharmacies won't sell syringes without a prescription, but you might be able to find a nice Pharmacist who will help you out.

Brian

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©