3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: What length fletch do you use most often?  (Read 1682 times)

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: What length fletch do you use most often?
« Reply #20 on: December 16, 2007, 01:21:00 PM »
Quote
Originally posted by OconeeDan:
4x4 works great for me!
Same here.

Offline sticshooter

  • Trad Bowhunter
  • **
  • Posts: 4210
Re: What length fletch do you use most often?
« Reply #21 on: December 16, 2007, 01:43:00 PM »
5" Anything I'm not fussy. But mostly shields.<><
The Church of God is an anvil that has worn out many hammers.

"Walk softly..and carry a sharp   Stic."
TGMM

Offline V-Archer

  • Trad Bowhunter
  • **
  • Posts: 460
Re: What length fletch do you use most often?
« Reply #22 on: December 16, 2007, 01:55:00 PM »
5" helical LW shield cut.

V-Archer
"If you have the will to win you have achieved half your success; if you don't, you have achieved half your failure"

Online Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12250
  • Contributing Member
    • Cavalier Pickups
Re: What length fletch do you use most often?
« Reply #23 on: December 16, 2007, 02:03:00 PM »
4x4 @ 105x75     :thumbsup:    

Four fletch allows for a 4" feather, so you can burn/chop two fletches from each full length feather for best economy.  More effective surface area for better control at trad hunting distances.  No cock feather, so no indexing needed on yer nock for faster nocking, too!     :)
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline varmint

  • Trad Bowhunter
  • **
  • Posts: 678
Re: What length fletch do you use most often?
« Reply #24 on: December 16, 2007, 02:21:00 PM »
Chop my own LW 5 1/2" high back shield cut.
Bowhunting......A way of life and death.

Offline Jack Guard

  • Trad Bowhunter
  • **
  • Posts: 1047
Re: What length fletch do you use most often?
« Reply #25 on: December 16, 2007, 05:42:00 PM »
5 1/2 for me.
TGMM Family of the Bow
Proud Member of the Twister Twelve

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: What length fletch do you use most often?
« Reply #26 on: December 16, 2007, 06:10:00 PM »
5" low shields. Right wing, straight fletch with a good offset. Flies straight, true & fast!
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline bentpole

  • Trad Bowhunter
  • **
  • Posts: 5104
Re: What length fletch do you use most often?
« Reply #27 on: December 16, 2007, 06:17:00 PM »
5 1/2 shields or naners they look awesome.

Online Adirondack Bowman

  • Trad Bowhunter
  • **
  • Posts: 177
Re: What length fletch do you use most often?
« Reply #28 on: December 16, 2007, 07:59:00 PM »
5&1/2 Hi-back shields

Offline Ralph Renfro

  • Trad Bowhunter
  • **
  • Posts: 234
Re: What length fletch do you use most often?
« Reply #29 on: December 16, 2007, 08:11:00 PM »
With selfbows I like a low brace height to make a longer power stroke, so I use 4inch feathers or my own design. Kinda like a shield cut that are a little higher.
Building Bows Is Only Half The Fun, The Other Half Is Passing That Knowledge On!

Offline Malery Oxendine

  • Trad Bowhunter
  • **
  • Posts: 89
Re: What length fletch do you use most often?
« Reply #30 on: December 16, 2007, 10:27:00 PM »
5.5 inch shield cut, left wing.

Offline Steelhead

  • Trad Bowhunter
  • **
  • Posts: 2547
Re: What length fletch do you use most often?
« Reply #31 on: December 17, 2007, 01:11:00 AM »
5.5 inch nanners,3 fletch on woodies.They just look better on woodies.5 inch, 3 fletch, parabolics on aluminums.

Offline Dave Pagel

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 933
Re: What length fletch do you use most often?
« Reply #32 on: December 17, 2007, 07:26:00 AM »
I use 5 inch shields most of the time, but occasionally 4 inch shields.

Offline MI_Bowhunter

  • Trad Bowhunter
  • **
  • Posts: 1008
Re: What length fletch do you use most often?
« Reply #33 on: December 17, 2007, 10:11:00 AM »
I use 5" on my hunting arrows and I use 4" on my target arrow.
"Failure is an attitude, not an outcome."  -Harvey Mackay

             :archer:               MikeD.

Offline FAIRCHASE

  • Trad Bowhunter
  • **
  • Posts: 41
Re: What length fletch do you use most often?
« Reply #34 on: December 17, 2007, 02:44:00 PM »
5" three fletch, shield cut, left helical
                    Regards, Carl

Offline Labs4me

  • Trad Bowhunter
  • **
  • Posts: 412
Re: What length fletch do you use most often?
« Reply #35 on: December 17, 2007, 02:59:00 PM »
Size matters!!! So I compensate with 5.5" nanner highbacks...
"You must not only aim right, but draw the bow with all your might." - Henry David Thoreau (Before the advent of compound bows with 85% letoff)

Offline BobW

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2318
Re: What length fletch do you use most often?
« Reply #36 on: December 17, 2007, 03:20:00 PM »
I use 5.75" Magnum 'Nanners in a Rt wing 3-fletch.  I need as much steering control as I am still trying to be consistent.  Since 5.75 wasn't a choice, I put down 6".

BobW
"A sagittis hungarorum libera nos Domine"
>>---TGMM-Family-of-the-Bow--->
Member: Double-T Archery Club, Amherst, NY
St. Judes - $100k for 2010 - WE DID IT!!!!

Offline JSC

  • Trad Bowhunter
  • **
  • Posts: 39
Re: What length fletch do you use most often?
« Reply #37 on: December 17, 2007, 03:24:00 PM »
5.5" left wing shield's ,chopped from wild turkey wing feathers.

Offline Mike Lee

  • Trad Bowhunter
  • **
  • Posts: 82
Re: What length fletch do you use most often?
« Reply #38 on: December 17, 2007, 05:24:00 PM »
I use 5" most of the time.

Offline Lone archer

  • Trad Bowhunter
  • **
  • Posts: 152
Re: What length fletch do you use most often?
« Reply #39 on: December 17, 2007, 06:03:00 PM »
5 1/2" ALL THE TIME.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©