INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Now you've done it!!!  (Read 1336 times)

Offline Slasher

  • Trad Bowhunter
  • **
  • Posts: 732
Now you've done it!!!
« on: April 29, 2008, 09:53:00 AM »
Thanks fellas... after seeing all the fine stuff you folks are doing, I went ahead and ordered a helle viedemann blade and some shedua and bocote...

With limited tools... whats the best way to shape a handle? Rasp and file or dremel tool? I wish I had access to a band saw to make some groovy curves, but tablesaw and chopsaw are what I have to work with... so...

I am sure this will be another fine mess I will be getting myself into...
Logged
Expect the best. Prepare for the worst. Capitalize on what comes.
                                        ~Zig Ziglar~

Offline Leftieshot

  • Trad Bowhunter
  • **
  • Posts: 306
Re: Now you've done it!!!
« Reply #1 on: April 29, 2008, 10:28:00 AM »
You might be able to use a coping saw for you groovy curves.  Dremel and some sanding drums will shape your handle but you will probably use several before you are done.  I don't like a rasp because they seem to tear or rip the wood, but files work well.
Logged

Offline skullworks

  • Trad Bowhunter
  • **
  • Posts: 2012
Re: Now you've done it!!!
« Reply #2 on: April 29, 2008, 11:02:00 AM »
Files and a dremel should work fine! You should be able to get some nice curves if you take your time. I use a file made for doing rifle bedding that I got from Brownells. Remember, you can take wood off but it's hard to put back! LOL!

 http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=6764&title=HALF-ROUND%20VULCANITE%20FILE
Logged
'cuz deer huntin' ain't catch & release!

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: Now you've done it!!!
« Reply #3 on: April 29, 2008, 04:21:00 PM »
After basic 2 dimensional flat profile, these are shaped ENTIRELY by files:
 

 

 

 
It's difficult to make mistakes with files, altough it can be done!
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: Now you've done it!!!
« Reply #4 on: April 29, 2008, 04:26:00 PM »
I couldn't get uin there to edit that post, so I'll add that these knives are all HARD!! maple, mallee root, desert ironwood and african blackwood.
Take your time, keep your file clean and the radio on.
The fit and comfort of the handle is one of the most important aspects of the knife. You have almost limitless control of the shaping process when using files.
Do a little searching and you can find the files that suit your needs.
I use a cabinet maker's rasp for the initial material removal and it takes stuff off almost TOO fast!
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline skullworks

  • Trad Bowhunter
  • **
  • Posts: 2012
Re: Now you've done it!!!
« Reply #5 on: April 29, 2008, 04:27:00 PM »
Dang Karl! Just gotta show off, huh? LOL! Beautiful work as always! I bet it takes some patience!!!
Logged
'cuz deer huntin' ain't catch & release!

Offline Slasher

  • Trad Bowhunter
  • **
  • Posts: 732
Re: Now you've done it!!!
« Reply #6 on: April 29, 2008, 05:48:00 PM »
Quote
Originally posted by kbaknife:

Take your time, keep your file clean and the radio on.
The fit and comfort of the handle is one of the most important aspects of the knife. You have almost limitless control of the shaping process when using files.
Do a little searching and you can find the files that suit your needs.
I use a cabinet maker's rasp for the initial material removal and it takes stuff off almost TOO fast!
I fknew I could probably do better with those as I tend to get a lil aggresive with power tools....   :biglaugh:

Those are some sure enough puty knives... I hope mine will look half as good... as I just am looking to have a GOOD skinning knife... that holds a decent edge and since I was pricing and looking for a gut hook blade, I figured why not go for it...
Logged
Expect the best. Prepare for the worst. Capitalize on what comes.
                                        ~Zig Ziglar~

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: Now you've done it!!!
« Reply #7 on: April 30, 2008, 11:08:00 PM »
slasher, where are you located in GA?
Dan
Logged

Offline Slasher

  • Trad Bowhunter
  • **
  • Posts: 732
Re: Now you've done it!!!
« Reply #8 on: May 01, 2008, 06:03:00 AM »
Not too far from you... I am in Coweta County..(newnan)
Logged
Expect the best. Prepare for the worst. Capitalize on what comes.
                                        ~Zig Ziglar~

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: Now you've done it!!!
« Reply #9 on: May 01, 2008, 07:38:00 AM »
About a 2 hr drive.  Maybe one day we'll hook up.
Dan
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©