INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: SATIN FINSH ON BLADES  (Read 782 times)

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
SATIN FINSH ON BLADES
« on: January 26, 2009, 10:37:00 AM »
CAN ANY ONE TELL ME HOW TO PUT A SATIN FINSH ON MY BLADES? I HAVE BEEN POLISHING THEM BUT I WANT TO TRY A SAITN FINSH.
THANKS
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: SATIN FINSH ON BLADES
« Reply #1 on: January 26, 2009, 11:26:00 AM »
I put WD40 on the black wet/dry sandpaper 600 grit -after its mounted with spray adhesive on a board
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: SATIN FINSH ON BLADES
« Reply #2 on: January 26, 2009, 11:33:00 AM »
THANKS RAY
HAVE YOU EVERY TRIED 2000 GRIT? I HAVE SOME AND THOUGHT IT MIGHT WORK TO HELP HIDE ANY FLAWS,
I BOUGHT A TORCH WITH MAPP GAS AND OXGEN, WILL THIS HEAT THE BLADE TO 1400 DEGREES?
THANKS FOR YOUR HELP
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: SATIN FINSH ON BLADES
« Reply #3 on: January 26, 2009, 02:08:00 PM »
2000 grit won't hide any flaws, Dana.

You have to get all the flaws out before you leave 150 grit.

Anything above 150 is only a polishing grit...it won't remove anything except the fine scratches of the previous grit if you rub the blade in a different direction.

I don't know about the torch-sorry
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: SATIN FINSH ON BLADES
« Reply #4 on: January 26, 2009, 02:11:00 PM »
THANKS
I LEARN SOMETHING EVERY DAY THANKS TO THIS FORUM
THANKS AGAIN RAY
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline knives

  • Trad Bowhunter
  • **
  • Posts: 7
Re: SATIN FINSH ON BLADES
« Reply #5 on: January 26, 2009, 04:05:00 PM »
The hand sanded finish ,in my opinion the best but I know some maker use a scotch brite belt or wheel to achieve similar results.
murray
Logged

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: SATIN FINSH ON BLADES
« Reply #6 on: January 26, 2009, 04:16:00 PM »
THANKS FOR THE ADVISE I'LL TRY IT TONIGHT.
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: SATIN FINSH ON BLADES
« Reply #7 on: January 26, 2009, 08:57:00 PM »
You can also try various scotch brite, as well as sand blasting.
Dan
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©