INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: etching? what do you use  (Read 801 times)

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
etching? what do you use
« on: February 18, 2009, 09:14:00 AM »
i was wondering what do you guys use to etch your blades to get the hammond line to show really nice.  what is it, where can i get it and how much does it usally cost.  thanks alot
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: etching? what do you use
« Reply #1 on: February 18, 2009, 12:56:00 PM »
I'm usually using either a 3:1 mix of water:ferric chloride or a 50:50 mix of distilled vinegar:ferric chloride.

Radio Shack still sells the etching solution, which is where I bought my bottle a few years ago.

Etching is only the first step  ;)   Then you get to decide to what degree you polish it, and how.
Logged
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: etching? what do you use
« Reply #2 on: February 18, 2009, 07:18:00 PM »
I have checked with Radio Shack about Ferric chloride with no luck. You can still find it on the internet though.

You can use vinegar alone or lemon juice, but fc seems to be my favorite. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline KHALVERSON

  • Trad Bowhunter
  • **
  • Posts: 846
Re: etching? what do you use
« Reply #3 on: February 18, 2009, 07:55:00 PM »
radio shack does sell a pcb etchant that if mixed 50/50 with water works pretty well
lin is correct no ferric cloride
kevin
Logged

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: etching? what do you use
« Reply #4 on: February 19, 2009, 07:39:00 AM »
pcb etchant is ferric chloride  :)

Not all stores carry it.  If can use Radio Shack's website to see which of your local stores has it, or order it online.
Logged
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: etching? what do you use
« Reply #5 on: February 19, 2009, 08:34:00 AM »
It has been discontinued to my knowlege. If you find a store that has some, get it.
It's easy to find all you need with a little internet search.
Dry crystals which require mixing, or in liquid form, which may or may not add to shipping.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©