HELP!! Is there a how-to flat grind out there?

[shortstroke 91]

I cut my blank and ground to shape but haven't got the hang of flat grind by freehand yet, so I'm wondering if there's a good "How-to" out there. I currently have a 4x36 belt sander and a 1x30 belt sander both with an assortment of belts. I also have some files but don't want to spend an eternity doing the bevel.

[tomh]

center cross metal working has some videos, look for the one by harvey dean

[sticshooter]

practice on a wood blank. Or scrap metal. You can also goolge it and there should a alot of info.<><

[Lamey]

start grinding,  when you have a pile of "steel dust" below your grinder thats about 3 feet tall,  you will know how to flat grind.

Kidding aside,  ive never used any videos, or even had anyone "teach" me,  but I would say the video by Harvey Dean would be a good place to start if your looking for info. on flat grinding.

Harvey does exceptionally clean grind lines, among the best there is.

[TheBigRedArcher]

I use jigs. No shame in wanting a straight grind.

TBRA