INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: First forged knife  (Read 677 times)

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
First forged knife
« on: October 23, 2009, 08:54:00 PM »
I thought i would share what i have learned at the hammer-in in old washington Ark.
I did this the sunday after the hammer-in
3/16 steel 1 1/4" bar stock
A big Thanks to Lin Rhea
 
 
Now it took me about 2-3 hr. to get it to this point, not to bad for my first one.
the next picture is after the grinding, total time about 4 hr.
 

I thought everything went fine, but then i though about the steel and where i had got it from, sure enought a piece of (homedepot steel) that was left over from making my knife vice,
All i can say is, it was very good practic.

Some of my new tools
My new forge( thanks Kevin Evans)
 
My new knife stamp press (thanks Karl Anderson)
 
My new knife vice
 
My little shop
 
For all the new guys(like me) find a hammer-in and go, you will learn alot.

Hope everyone enjoys
dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: First forged knife
« Reply #1 on: October 23, 2009, 09:38:00 PM »
Dana, great job on the forging and grinding!  I love the blade profile!

Nice shop and equipment,  thanks for the tour!

Steve
-------------
IN GOD WE TRUST
Logged

Offline LAR43

  • Trad Bowhunter
  • **
  • Posts: 620
Re: First forged knife
« Reply #2 on: October 23, 2009, 09:46:00 PM »
A hammer-in can save you weeks or months of trial & error when you're learning to forge.

Great shape on the blade! Now get yourself some 1084 (relatively simple to heat treat)& make the real McCoy!!

Larry
Logged
Age brings us the priceless gift of experience and knowledge. . . Priceless, but not free.

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: First forged knife
« Reply #3 on: October 23, 2009, 10:12:00 PM »
Great job Dana,  :thumbsup:  
They will get easier as time goes by  ;)
Great shop and neater than mine,just keep adding those tools,looks to me like what a guy needs never ends  :biglaugh:
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: First forged knife
« Reply #4 on: October 24, 2009, 08:27:00 AM »
Dana,
     That's a good forging job, especially for your first. I took a few pictures of the Hammer In, but I saw you taking some too. Are you going to post some in another thread? Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: First forged knife
« Reply #5 on: October 24, 2009, 11:10:00 AM »
Lin, i did take some,and i can put them up, but you might do some also, i only have 4-5 pictures,
I"ll start a new thread and you can add some pictures to it
thanks for all the nice words about my new forging
dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: First forged knife
« Reply #6 on: October 24, 2009, 01:42:00 PM »
JR Cook

 

This Dr Jim Batson, BR Hughes, and his wife Carolyn.

 
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Lamey

  • Trad Bowhunter
  • **
  • Posts: 1677
Re: First forged knife
« Reply #7 on: October 24, 2009, 05:42:00 PM »
Nice work!  What make is that blade vice????
Logged

Offline NativeArcher

  • Trad Bowhunter
  • **
  • Posts: 77
Re: First forged knife
« Reply #8 on: October 24, 2009, 07:00:00 PM »
does anyone ever have a hammer in around ny
Logged
"how many bows do you need".my wife
Every moving thing that is alive shall be food for you; I give all to you , as I gave the green plant. Genesis 9:3

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: First forged knife
« Reply #9 on: October 24, 2009, 10:23:00 PM »
lamey
the maker of the vise is me, i looked at some pictures and tried to do the best i could and it works good  :goldtooth:  i just used the stuff laying around the garage.
dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: First forged knife
« Reply #10 on: October 24, 2009, 10:37:00 PM »
Guys
could some of you guys post pictues of a forged knife before you grind it. any and all pic. are welcome
thanks
dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: First forged knife
« Reply #11 on: October 25, 2009, 07:55:00 AM »
I'l do better than that. Let's start a "before and after" thread. This will show the rough forged blade and the final product. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©