INFO: Trad Archery for Bowhunters



Author Topic: Found a forge  (Read 569 times)

Offline Tim C

  • Trad Bowhunter
  • **
  • Posts: 7
Found a forge
« on: January 18, 2010, 03:24:00 PM »
Found a forge in an antique shop. It was a hand lever type and in good shape for $300.00. Don't know if it's a good price or not. I'm guessing you might be able to get it a bit cheaper. Sorry, couldn't take a picture.

Offline LAR43

  • Trad Bowhunter
  • **
  • Posts: 620
Re: Found a forge
« Reply #1 on: January 18, 2010, 08:13:00 PM »
Look around . . unless you're dead set on forging with coal you'd probably be better off with a gas forge. You can get a nothing fancy unit on E *** for less than that. Look up poor boy there.
Gas is a lot easier to control & will get less complaints from the neighbors if you live in suburbia.

Larry
Age brings us the priceless gift of experience and knowledge. . . Priceless, but not free.

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: Found a forge
« Reply #2 on: January 18, 2010, 10:18:00 PM »
Good advise, unless you just must use coal!

Steve
--------
Potomac Forge
--------
IN GOD WE TRUST

Offline Tim C

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Found a forge
« Reply #3 on: January 19, 2010, 07:59:00 AM »
Thanks guys

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Found a forge
« Reply #4 on: January 19, 2010, 08:23:00 AM »
Tim,
     As the other guys are saying I use gas, but I keep a couple of nice coal forges too. I enjoy using coal. So, if that's what you like, then go for it. It's hard to say if the forge was worth it, but if it's in good shape, I would say it is. The last one I bought, I got at an auction for $66 dollars and it's the best I have seen. All I can say is I got a good deal. I tightened it up and painted it and it's worth a few hundred now.  The one you bought, probably will be easy to load and unload, which can be a plus. It really depends on your situation. I do a lot of demos and coal works well for that in "old timey" stuff. You know. If I have to try to get something made quick, gas is the way I do it. Lin
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline chris amos

  • Trad Bowhunter
  • **
  • Posts: 92
Re: Found a forge
« Reply #5 on: January 20, 2010, 01:20:00 AM »
Hey Lin! I'm with Lin on this one, gas is the way to go for ease and control. If you get the 50 dollar knife shop book it shows a super simple and cheap ( like 50 bucks ) propane forge made from a couple of fire bricks and a torch. I have one like it that i've been using for years for small stuff and its great. You can make a 3 to 4 inch blade in it.
Don't take life too seriously you'll never make it out alive. Van Wilder
67 Super Kodiak 45#

Offline Tim C

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Found a forge
« Reply #6 on: January 20, 2010, 10:51:00 AM »
Thanks guys. I didn't buy the forge, just saw it an thought it was a little pricey. Waiting on the $50 Knife Shop book to get started on my first project. More questions to come I'm sure.

Offline oldtimerbow

  • Trad Bowhunter
  • **
  • Posts: 106
Re: Found a forge
« Reply #7 on: January 21, 2010, 05:04:00 PM »
I agree that the gas forge is much easier to control but it gives me a lot of pleasure to use the coal forge. The sights and smells all scream tradition for me.
oldtimerbow

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©