INFO: Trad Archery for Bowhunters



Author Topic: Couple jigs/tools  (Read 1311 times)

Offline bjansen

  • Trad Bowhunter
  • **
  • Posts: 2263
Couple jigs/tools
« on: November 23, 2014, 07:07:00 PM »
I made a couple tools this weekend.  First is a small wheel holder, made from 6061. I put the two pieces together with  1/2" OD - .260 ID aluminum pipe which is inset in a .200 deep tenon in each of the side pieces. Works really well.

   

   

Next is a scribing jig made from a 1 1/8" piece of aluminum round stock, a cut of 2" angle iron and a cam lock. I drilled the pen hole so it would hold a fine tip sharpy real snug and milled a slot so it can adjust up down as well.The bottoms are polished flat on the disc sander.  This is just what I needed.  

   

   

   

   

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: Couple jigs/tools
« Reply #1 on: November 23, 2014, 07:27:00 PM »
nice work!!! I like that scribe a LOT
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Couple jigs/tools
« Reply #2 on: November 23, 2014, 07:27:00 PM »
First class work.    :campfire:
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline gudspelr

  • Trad Bowhunter
  • **
  • Posts: 990
Re: Couple jigs/tools
« Reply #3 on: November 24, 2014, 01:14:00 AM »
Wow, those look great. That scribe would be SUPER handy. I use a marker to help keep my center line on my handle material as I remove material, but would be a lot less clumsy of an operation with that scribe. Nicely done  :) .

Jeremy
"Have nothing in your house that you do not know to be useful, or believe to be beautiful."
- William Morris

Craftsmen strive to make their products both.

Offline Thadbow

  • Trad Bowhunter
  • **
  • Posts: 508
Re: Couple jigs/tools
« Reply #4 on: November 24, 2014, 05:56:00 PM »
Great job Brad, I like it!

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #5 on: November 26, 2014, 06:50:00 PM »
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #6 on: November 26, 2014, 06:52:00 PM »
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #7 on: November 26, 2014, 06:53:00 PM »
Dang it Brad, I'm jealous of your ability to build stuff! I thought you were just a boring accountant!    ;)    Very nice work AGAIN my friend!
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #8 on: November 26, 2014, 06:56:00 PM »
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #9 on: November 26, 2014, 06:56:00 PM »
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #10 on: November 26, 2014, 06:57:00 PM »
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Couple jigs/tools
« Reply #11 on: November 26, 2014, 06:57:00 PM »
I have no idea how I ended up with so many posts!
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline bjansen

  • Trad Bowhunter
  • **
  • Posts: 2263
Re: Couple jigs/tools
« Reply #12 on: November 26, 2014, 07:03:00 PM »
Thanks Gents!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©