Author Topic: Neat Bow Backing Idea.  (Read 3870 times)

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Neat Bow Backing Idea.
« on: August 16, 2008, 07:57:00 PM »
My friend George is real creative, mighty good craftsman as well. He has always been a bird dog guy, best wing shot I have ever seen.

I was at his house the other day, he has made lot of osage bows over the years. He said they need a little tillering touch-up so I volunteered to rework some of them.

George backed this bow with pheasant tail feathers and it really looks sharp. I don't know what type of glue he used but the feather is really flat and looks like part of the bow.

While I was tillering the bow it popped a splinter on the back so I glued the splinter back in place and put a super glue soaked wrap on for insurance. The bow is 64" 46@28.

 

Offline Kip

  • Trad Bowhunter
  • **
  • Posts: 1720
Re: Neat Bow Backing Idea.
« Reply #1 on: August 16, 2008, 08:08:00 PM »
Very nice Eric.I like it. Kip

Offline SouthMDShooter

  • Trad Bowhunter
  • **
  • Posts: 591
Re: Neat Bow Backing Idea.
« Reply #2 on: August 16, 2008, 08:29:00 PM »
wow tht looks very cool
"Two roads diverged in a wood, and I --
I took the one less traveled by,
And that has made all the difference."
- Robert Frost

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Neat Bow Backing Idea.
« Reply #3 on: August 16, 2008, 08:51:00 PM »
That's great looking...Wow. Very Nice

Offline sticshooter

  • Trad Bowhunter
  • **
  • Posts: 4210
Re: Neat Bow Backing Idea.
« Reply #4 on: August 16, 2008, 08:59:00 PM »
Now that is just way cool. So eric you gonna make one up? like maybe 66" 52#30"LOL<><<><
The Church of God is an anvil that has worn out many hammers.

"Walk softly..and carry a sharp   Stic."
TGMM

Offline Steve B.

  • Trad Bowhunter
  • **
  • Posts: 312
Re: Neat Bow Backing Idea.
« Reply #5 on: August 16, 2008, 09:15:00 PM »
About a thousand ideas just went through my head.  Can you post a pic of the whole bow?  Thanks

Offline Shaun

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3619
Re: Neat Bow Backing Idea.
« Reply #6 on: August 16, 2008, 09:46:00 PM »
The thought has occurred to me too since a tail feather looks about like a limb profile. Glad to see someone has done it.

Eric, I used your tillering gizmo device for the final stage of my take down yew bow. Thanks again for the idea.

Online wislnwings

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 854
Re: Neat Bow Backing Idea.
« Reply #7 on: August 17, 2008, 12:06:00 AM »
That does look nice.

Offline Traxx

  • Trad Bowhunter
  • **
  • Posts: 615
Re: Neat Bow Backing Idea.
« Reply #8 on: August 17, 2008, 12:07:00 AM »
Well,Ill be!!!!!
Target archery is seeing how far away you can get and still hit the bull's eye. Bowhunting is seeing how close you can get and never miss your mark.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Neat Bow Backing Idea.
« Reply #9 on: August 17, 2008, 11:51:00 AM »
OK Eric, You got us wondering how so its up to you to find out.    That is way cool. Like Shaun I have given thought to using other feathers for bow backings.     Pat
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Jerry Jeffer

  • Trad Bowhunter
  • **
  • Posts: 3676
Re: Neat Bow Backing Idea.
« Reply #10 on: August 17, 2008, 03:18:00 PM »
Another vote for finding out how its done.
I will give thanks to the LORD because of his righteousness and will sing praise to the name of the LORD Most High.

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Neat Bow Backing Idea.
« Reply #11 on: August 17, 2008, 03:23:00 PM »
I just went and checked my stash of feathers, and the quill on a pheasant feather isn't all that big. A guy might sand it a bit on the belly side, just to help it stick. I'd use TBII or III.
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Neat Bow Backing Idea.
« Reply #12 on: August 17, 2008, 05:35:00 PM »
Just called George. He dipped the feather in acetone to remove the oils. Sanded the belly side quill of the feather. Put one coat of varnish on the belly of the feather and one one the back of the bow. I am pretty sure he uses spar urethane. Next he positioned the feather on the back of the bow and use a small brush to push out the air bubbles out from under the feather and make it lay flat. He said he used a knife blade to work stubborn air bubbles out.

He said his method was similar to decoupage.

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Neat Bow Backing Idea.
« Reply #13 on: August 17, 2008, 05:49:00 PM »
might have to try that one day...

Offline NightHawk

  • Trad Bowhunter
  • **
  • Posts: 835
Re: Neat Bow Backing Idea.
« Reply #14 on: August 18, 2008, 12:33:00 PM »
does it make the bow  (here it comes) "light as a feather?"    :biglaugh:    :biglaugh:
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

Offline formerbutcher

  • Trad Bowhunter
  • **
  • Posts: 398
Re: Neat Bow Backing Idea.
« Reply #15 on: August 18, 2008, 01:05:00 PM »
Very cool !
It's a great day to be alive !!

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Neat Bow Backing Idea.
« Reply #16 on: August 18, 2008, 03:15:00 PM »
Joe, that was just pure CORN!! I like it  :biglaugh:
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Neat Bow Backing Idea.
« Reply #17 on: August 18, 2008, 03:49:00 PM »
Cool.  Someone, I thought it was Dano??? maybe it was NewGuy (Shane) did that with a turkey tailfeather a few years back.  It was very pretty.
Take a kid hunting!

TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©