Author Topic: Bingham take-down recurve project (Read 2774 times)

SoNevada Archer · « **on:** August 17, 2008, 05:19:00 PM »

I am putting together the hotbox and limb form for a Bingham takedowm recurve. I have finished the hot box and have glued the wood together for the limb form.
My calculation was off just a bit for the limb form and my finished width is a 1/6" over the design desired width. I called Bingham and they said a 1/6" wasn't going to be a problem.

As I am getting ready to cut the limb form into two pieces...Is there anyone out there that has used the Bingham system?
Any information that will help me from making any mistakes???

Dano · « **Reply #1 on:** August 17, 2008, 06:15:00 PM »

Sorry I can't help much with glass bows, I've played with a few. I noticed we live pretty close to each other. I'm over here in Overton, I'm in the phone book, maybe we can get together some time.

**DONOTDELETE** · « **Reply #2 on:** August 17, 2008, 06:21:00 PM »

I don't even know what kind of style that is... Good luck with it.

SoNevada Archer · « **Reply #3 on:** August 17, 2008, 06:32:00 PM »

Danial, you live in Overton???
We live really close to each other!

Dano · « **Reply #4 on:** August 17, 2008, 06:40:00 PM »

Check it out Sal. http://www.binghamprojects.com/features.htm

Yep, I'm on Cottonwood.

kennym · « **Reply #5 on:** August 17, 2008, 06:46:00 PM »

I've made a few...
Just follow the plans,you should be good.
If you wanna save some sanding and have acess to a router,here is how I do it nowdays....
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=054410

I also sell a few lams,here

http://www.kennyscustomarchery.com/

Hey Dano,how are ya?

Dano · « **Reply #6 on:** August 17, 2008, 06:57:00 PM »

Good Kenny, how are you?

SoNevada Archer · « **Reply #7 on:** August 17, 2008, 07:00:00 PM »

THANKS KENNY!!!
The link was awesome and I wish we lived closer to each other. I will keep you posted as to my progress.

kennym · « **Reply #8 on:** August 17, 2008, 07:01:00 PM »

Just fine,we mmet at mojam? Do I have the right feller?

Dano · « **Reply #9 on:** August 17, 2008, 07:09:00 PM »

Yep, I bought that kgnarly looking stave from ya. It'll make a bow.

Thanks again. So what size router bit did you use? It has to be a bit long huh? There aren't that many pattern cutting bits out there that are all that long.

kennym · « **Reply #10 on:** August 17, 2008, 09:02:00 PM »

Good deal Ron!!
Dano,I used a 1/4" x 2" strait bit,but my form was only 1 1/2" thick!

**DONOTDELETE** · « **Reply #11 on:** August 17, 2008, 09:13:00 PM »

Kenny, thats a awesome looking bow you did in the link....

kennym · « **Reply #12 on:** August 17, 2008, 10:59:00 PM »

Thanks Sal!!
BTW,your order ships in the AM

**DONOTDELETE** · « **Reply #13 on:** August 17, 2008, 11:45:00 PM »

Kool, Thanx Kenny

News:

Author Topic: Bingham take-down recurve project (Read 2774 times)

SoNevada Archer

Bingham take-down recurve project

Dano

Re: Bingham take-down recurve project

DONOTDELETE

Re: Bingham take-down recurve project

SoNevada Archer

Re: Bingham take-down recurve project

Dano

Re: Bingham take-down recurve project

kennym

Re: Bingham take-down recurve project

Dano

Re: Bingham take-down recurve project

SoNevada Archer

Re: Bingham take-down recurve project

kennym

Re: Bingham take-down recurve project

Dano

Re: Bingham take-down recurve project

kennym

Re: Bingham take-down recurve project

DONOTDELETE

Re: Bingham take-down recurve project

kennym

Re: Bingham take-down recurve project

DONOTDELETE

Re: Bingham take-down recurve project

Users currently browsing this topic: