Author Topic: Favorite sealers.  (Read 2010 times)

Offline b.glass

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3098
Favorite sealers.
« on: August 18, 2008, 01:02:00 AM »
I like Tru Oil and parafin. The current bow I'm working on is going to be backed with snake therefore I will use Tru Oil. I have'nt worked enough with a parafin finish to know how it would do on snake skin backings. Can anyone give me an opinion?
B.Glass, aka Mom, aka Longbowwoman
Gregory R. Glass Feb. 14th, 1989-April 1st, 2007; Forever 18.
TGMM Family of The Bow
Mark 5:36 "Don't be afraid, just believe".

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Favorite sealers.
« Reply #1 on: August 18, 2008, 08:17:00 AM »
what about a spray on poly or a wipe on poly. I know lots of ppl use parafin on air backed bows.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Favorite sealers.
« Reply #2 on: August 18, 2008, 08:53:00 AM »
Tru-Oil is the finish I use mostly. I haven't used paraffin but I think for self bows, where it will sink in, it makes a good, easy and cheap finish.  With snake skin I don't think it would sink in and would eventually crack as the bow bends. Just a guess on my part.   Pat
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Favorite sealers.
« Reply #3 on: August 18, 2008, 09:24:00 AM »
You have to heat the bow slightly for paraffin to work well, I don't think I'd do that to a snake backed bow. I used to use Thunderbird 2 part epoxy, but here lately I'm learning to love Tru Oil, it's so much easier to use, bar none.
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline NightHawk

  • Trad Bowhunter
  • **
  • Posts: 835
Re: Favorite sealers.
« Reply #4 on: August 18, 2008, 12:30:00 PM »
profin is a very good sealer. Some of the big arrow makers use it to seal thier shafts
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: Favorite sealers.
« Reply #5 on: August 18, 2008, 05:41:00 PM »
tru oil is awesome i used it on a bow a mate made me to seal the grip after i worked on it some to get it fitting my hand right.  :thumbsup:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline Steve Kendrot

  • Trad Bowhunter
  • **
  • Posts: 789
Re: Favorite sealers.
« Reply #6 on: August 18, 2008, 08:57:00 PM »
A carpenter friend of mine suggested a 1:1:1 ratio of Mineral spirits, tung oil and spar varnish, increasing the ratio of spar varnish with successive coats. He's recommending  applying a coat to soak in, wiping off excess after 5-10 minutes and waiting 24 hours to apply the next coat. Light sanding with superfine grit between coats. Anyone foresee any problems with this on a BBO?

Steve

Offline Chad Sivertsen

  • Trad Bowhunter
  • **
  • Posts: 140
Re: Favorite sealers.
« Reply #7 on: August 19, 2008, 12:29:00 PM »
I would use parafin on unbacked bows.

As noted here Tung oil is popular. I use Minwax Spar Urethane on most of my bows and arrows. I wipe on 2-4 thin coats allowing an hour or two between coats depending on temp and humidity. I use the gloss and it is flashy for show bows, it can be buffed and polished to a mirror finish. For hunting I buff with 0000 steel wool and then use a hard wax.

Steve has both covered with his mixture. That should work fine as long as there are no chemical or curing conflicts. It should penetrate the wood well. Let us know the results.
Happy Trails,
Chad

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©