Author Topic: Following the vertical grain  (Read 1028 times)

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Following the vertical grain
« on: November 15, 2008, 09:10:00 PM »
I started on a hickory bow with a bit if a snaky grain and decided to add a section on my web site showing the process of following the vertical grain. Jawge
 http://georgeandjoni.home.comcast.net/~georgeandjoni/layout.html

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Following the vertical grain
« Reply #1 on: November 15, 2008, 09:20:00 PM »
Nice George. This should be helpful.    Pat
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Following the vertical grain
« Reply #2 on: November 15, 2008, 09:24:00 PM »
Thanks. Pat. Jawge

Offline Shaun

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3619
Re: Following the vertical grain
« Reply #3 on: November 16, 2008, 08:59:00 PM »
Good pictures. That's the first thing I do with lay out too - draw a center line that tries to follow the grain.

Offline Okie 1

  • Trad Bowhunter
  • **
  • Posts: 188
Re: Following the vertical grain
« Reply #4 on: November 16, 2008, 09:33:00 PM »
Good job George. That will surely help a lot of new guys. Keep up the good work.


John
Take a kid hunt'n. (If not who'll drag your deer out when you get old?!) Bear Creek Selfbows

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Following the vertical grain
« Reply #5 on: November 17, 2008, 09:57:00 AM »
Thanks, Shau and Okie. I'll try to put up some pictures of the bow roughed out asap to show how the width taper towards the nocks needs to reflect that center, sanky line. Jawge

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Following the vertical grain
« Reply #6 on: November 17, 2008, 09:58:00 AM »
Oops. Sorry, Shaun. Jawge

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©