« previous next »
Pages: [1]   Go Down

Author Topic: First board bow completed  (Read 1018 times)

Offline Focusource

  • Trad Bowhunter
  • **
  • Posts: 274
First board bow completed
« on: November 19, 2008, 08:08:00 PM »
Red oak, 69" ntn, 50#@28".  It is backed with camouflage burlap and finished with 5 coats of tung oil.  I tillered with a tape measure marking three points on each limb.  It shoots quite well.  Note: When tired my draw elbow gets elevated.

   

It is very satisfying to make your own equipment.  The Bowyer's Bench has been a great addition to the site.

Jeff
Logged
TradTech Pinnacle II riser, 50# BlackMax limbs

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: First board bow completed
« Reply #1 on: November 19, 2008, 08:53:00 PM »
Very nice. Congratulatiuons! Jawge
Logged

Offline Dick in Seattle

  • Trad Bowhunter
  • **
  • Posts: 1673
Re: First board bow completed
« Reply #2 on: November 19, 2008, 08:57:00 PM »
looking good!   I still haven't gotten up the courage to do a board bow.   I think that must be more challenging than a glass layup.  You did great...
Logged
Dick in Seattle

"It ain't how well the bow you shoot shoots, it's how well you shoot the bow you shoot."

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: First board bow completed
« Reply #3 on: November 19, 2008, 10:03:00 PM »
Nice job Jeff, you did good.

Dick, equally challenging I'd say, just a different mind set.
Logged
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: First board bow completed
« Reply #4 on: November 19, 2008, 10:58:00 PM »
Nice tiller!
Logged
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline Widowbender

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1038
Re: First board bow completed
« Reply #5 on: November 19, 2008, 11:09:00 PM »
:thumbsup:     :thumbsup:
Good Job...I hope to have my first board bow finished this weekend...

David
Logged
David

>>>>--TGMM-Family-of-the-Bow-->

Chatham County Chapter NWTF
Chapel Hill Friends of NRA

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15005
Re: First board bow completed
« Reply #6 on: November 19, 2008, 11:26:00 PM »
God job. You got a nice even bend in those limbs.     Pat
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: First board bow completed
« Reply #7 on: November 20, 2008, 12:19:00 AM »
good job!! better than mine. mine went Bang!!! well done and yeah its good fun  :clapper:
Logged
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline Focusource

  • Trad Bowhunter
  • **
  • Posts: 274
Re: First board bow completed
« Reply #8 on: November 20, 2008, 03:19:00 AM »
Thank you so much.  As a daily reader, your names have become familiar to me.  I really appreciate your kind words.

Jeff
Logged
TradTech Pinnacle II riser, 50# BlackMax limbs

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: First board bow completed
« Reply #9 on: November 20, 2008, 06:51:00 AM »
Nice one Jeff.
Like Ho'nehe jeff, my first one went bang, but the next one is going to be great  :jumper:
Logged
Keep the wind in your face and the sun at your back.

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: First board bow completed
« Reply #10 on: November 20, 2008, 08:28:00 AM »
I am usually a tiller critic on first bows but can't find one thing wrong with your tillering job. Real nice!
Logged

Offline SoNevada Archer

  • Trad Bowhunter
  • **
  • Posts: 327
Re: First board bow completed
« Reply #11 on: November 20, 2008, 09:46:00 AM »
Looks great man...congrats!
  :clapper:
Logged
The doom of man...that he forgets!

Offline shawn

  • Trad Bowhunter
  • **
  • Posts: 159
Re: First board bow completed
« Reply #12 on: November 20, 2008, 09:59:00 AM »
That's a nice looking bow. Great job!!!
Logged

Offline Okie 1

  • Trad Bowhunter
  • **
  • Posts: 188
Re: First board bow completed
« Reply #13 on: November 20, 2008, 10:59:00 AM »
Nice job. Did it take any set? My board bows usally take an inch or two. Your tiller looks great.


John
Logged
Take a kid hunt'n. (If not who'll drag your deer out when you get old?!) Bear Creek Selfbows

Offline Focusource

  • Trad Bowhunter
  • **
  • Posts: 274
Re: First board bow completed
« Reply #14 on: November 20, 2008, 02:29:00 PM »
Thanks again to all.  

John, the bow is showing 2.25 inches of set. I think I could have reduced the amount of set by removing more wood during the rough out stage. I am making another bow now, this time based on The Ferret's instructions. I am treating rough out as pre-tillering. You know, like I have an idea of how the limb should look before I start floor tillering. We will see if it makes any difference.

Jeff
Logged
TradTech Pinnacle II riser, 50# BlackMax limbs

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: First board bow completed
« Reply #15 on: November 20, 2008, 02:52:00 PM »
Jeff.
Let us know if the "roughing in" helps to prevent the set. My bow developed about an inch of set before it went bang. Does anybody else know if that technique will reduce set or is inducing some reflex the only real way to avoid it.
Tony
Logged
Keep the wind in your face and the sun at your back.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©