Author Topic: My first bow I made by myself.  (Read 1671 times)

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
My first bow I made by myself.
« on: November 28, 2008, 10:39:00 PM »
How's it look. I like to think I did a good job.   :thumbsup:   It is a hickory bow 70# @ 28" Shoots good.   :archer:  . Does the tiller look good??? The left limb is the top one.
 
 

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: My first bow I made by myself.
« Reply #1 on: November 28, 2008, 11:08:00 PM »
The tiller at brace looks good. How about a full draw and unbraced pic. Pat
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
Re: My first bow I made by myself.
« Reply #2 on: November 29, 2008, 01:07:00 AM »
Sure Pat I will post one tomorrow.

Offline sulphur

  • Trad Bowhunter
  • **
  • Posts: 269
Re: My first bow I made by myself.
« Reply #3 on: November 29, 2008, 06:51:00 AM »
i agree with pat, tiller looks good but full draw tells the tale.  nice job.
Rumblin, Stumblin, Bumblin

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
Re: My first bow I made by myself.
« Reply #4 on: November 29, 2008, 02:37:00 PM »
Well upon looking at the full draw pics the top lomb looks HORRIBLE it needs work don't it???

 

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: My first bow I made by myself.
« Reply #5 on: November 29, 2008, 02:55:00 PM »
Yeh, that top limb needs a little work. Looks like too much bend right at the fade then flat and then bending then flat again at mid limb. It shouldn't take too much scraping to get that done so go slow.
   On self bows, the only way to see good tiller is at full draw. Pat
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Shaun

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3619
Re: My first bow I made by myself.
« Reply #6 on: November 29, 2008, 09:13:00 PM »
I don't know, looks dang good for a first bow. Maybe a little flat spot just above the fade on top but way better than my first one, or the next several after that. How does it shoot?

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
Re: My first bow I made by myself.
« Reply #7 on: November 29, 2008, 10:29:00 PM »
It shoots darts. It is a really good shooter.

Offline bjansen

  • Trad Bowhunter
  • **
  • Posts: 2263
Re: My first bow I made by myself.
« Reply #8 on: November 30, 2008, 04:02:00 AM »
Nice Job!!!

Offline The Gopher

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 304
Re: My first bow I made by myself.
« Reply #9 on: November 30, 2008, 09:16:00 AM »
like pat said, a little scraping will fix it right up. i have made horrible bows, believe me that bow is far from horrible. especially at 70# you have plenty of weight to work with, unless you were really set on a 70# bow, good luck, Dan.
"The future is, of all things, the thing least like eternity. It is the most temporal part of time, for the past is frozen and no longer flows, and the present is all lit up with eternal rays." ~C.S. Lewis

Offline Springbuck

  • Trad Bowhunter
  • **
  • Posts: 127
Re: My first bow I made by myself.
« Reply #10 on: December 01, 2008, 01:27:00 AM »
Nice job, and probably even better once you "fix" those few little spots.

  Also, be sure you are pulling from exactly where you expect an arrow to nock,both by hand and on the board...
42% of statistics are made up, and the other 62% are inaccurate.

Offline va

  • Trad Bowhunter
  • **
  • Posts: 194
Re: My first bow I made by myself.
« Reply #11 on: December 01, 2008, 12:05:00 PM »
Deer Slayr - if you saw the whip-tillered ugly stick I made the first time out, you would laugh til the tears came.

Good work and keep it up.  Every bow teaches you something.

By the way - you awful young to be pullin 70#.  I hope you don't get mad easy.
Poor folk with poor ways, but rich just the same.

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
Re: My first bow I made by myself.
« Reply #12 on: December 01, 2008, 02:28:00 PM »
The bow I WAS working on just BLEW UP. Kinda gets ya down dosen't it  :(

Offline tim-flood

  • Trad Bowhunter
  • **
  • Posts: 327
Re: My first bow I made by myself.
« Reply #13 on: December 01, 2008, 02:38:00 PM »
Did it blow at the top fade?? it looks like the grain runs off right there!!  the bottom limb looks great.  it has started now!!! gottta make a better one now!!

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: My first bow I made by myself.
« Reply #14 on: December 01, 2008, 03:15:00 PM »
If you ain't breakin' em, you ain't makin' em!  Sorry it broke but study the break and see what caused it. If you learn from it you are still ahead. Now its time to start another.     Pat
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline soopernate

  • Trad Bowhunter
  • **
  • Posts: 553
Re: My first bow I made by myself.
« Reply #15 on: December 01, 2008, 05:23:00 PM »
You definitely want to get it down before you try selling them (saw your ambition on another post) The last thing you want is a law suit over someone getting hurt if it DOES blow.
I humbly follow in the learned footsteps of those who precede me.

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
Re: My first bow I made by myself.
« Reply #16 on: December 02, 2008, 07:56:00 PM »
Ya'll misunderstand. The bow in the pic is FINE shootin' better than ever. I was working on a bow with a piece of hickory that had a lot of runups on it, we are running out of wood, That's the one that blew up not this one. Thanks Brandon

Offline soopernate

  • Trad Bowhunter
  • **
  • Posts: 553
Re: My first bow I made by myself.
« Reply #17 on: December 02, 2008, 08:57:00 PM »
Why so testy? I never said that your bow BROKE....I said you want to make sure everything is good and long lasting before you try selling them as you asked. Lawsuits are not fun and lets face it we are largely SUIT happy in this society.  Your defensiveness is kind of concerning to me.  Sorry if I offended with what I thought was sound advice.
I humbly follow in the learned footsteps of those who precede me.

Offline Deer Slayr

  • Trad Bowhunter
  • **
  • Posts: 26
Re: My first bow I made by myself.
« Reply #18 on: December 02, 2008, 09:23:00 PM »
Not a problem. I'm a little jumpy right now. Sorry

Offline Minuteman

  • Trad Bowhunter
  • **
  • Posts: 282
Re: My first bow I made by myself.
« Reply #19 on: December 18, 2008, 08:10:00 AM »
Your response was not at all "testy" in my estimation.
There sure is alot of air around a squirrel...eeyup.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©