Author Topic: bow build along continued... (Read 1604 times)

SoNevada Archer · « **on:** December 12, 2008, 08:08:00 PM »

dry stacking the limb

Laying them out ready for glue

gluing

checking final fit in limb press

into the hot-box

ready to be stripped from form

both limbs out and ready for working
more later...

TimZeigler · « **Reply #1 on:** December 12, 2008, 08:33:00 PM »

And a limb is born.....

Keep it up, looking good so far.

Tim

deadpool · « **Reply #2 on:** December 12, 2008, 08:56:00 PM »

hey ron what part of southern nevada do u live in?

kennym · « **Reply #3 on:** December 12, 2008, 10:06:00 PM »

SoNevada Archer · « **Reply #4 on:** December 12, 2008, 11:43:00 PM »

Thanks guys...deadpool I live in Logandale.

SoNevada Archer · « **Reply #5 on:** December 13, 2008, 12:17:00 AM »

riser ready to be trued up

now over to Dano's to true up the flats

Trusty Dano helping yours truly with my lack of experience with a jointer

drilling the riser

laying out my template lines

riser & limbs drilled

first fit up...they look fairly in line!
I'll post more tomorrow!
Good night all.

bjansen · « **Reply #6 on:** December 13, 2008, 03:04:00 AM »

Looks excellent...I will be trying a bingham T/D in a couple weeks, so this is great to see.
Can you tell us what the riser is made of?

Great job!!!

Pat B · « **Reply #7 on:** December 13, 2008, 09:49:00 AM »

She's coming along nicely. I didn't realize Dano was helping you. Stay away from his lemonade until after the power tools are turned off! d;^) Pat

Dano · « **Reply #8 on:** December 13, 2008, 11:08:00 AM »

Pat, Ron does not need my lemonade to have a good time.

Nice pictures Ron, did you clean up your shop for the photos?

SoNevada Archer · « **Reply #9 on:** December 13, 2008, 11:12:00 AM »

Good morning all!
The materials are walnut micarta & paduak.
Okay here we go with more photos...

1st stringing, the initial brace hight was within limits and I found which limb was heavier, now I know which way is north and which is south!

These limb tips are really "do overs" but came out great!

Now it's time to start shaping the riser...AWWW...grinders...I'm home!

Rounding out the flats and removing most of the blocky edges.

more shaping...you can really see the saw dust in the air. I need a better vacuum system.

After quite a bit of hand work,the riser is all but final finished with 320 grit sand paper.

Putting the final spray coating on. Now I have to give it 3 days drying time.

SoNevada Archer · « **Reply #10 on:** December 13, 2008, 11:28:00 AM »

WOW, you can really see how dirty my shop is from this photo...Sorry Dano!
Ok, we are done with the drying and now it's on to a light rubbing with #000 steel wool. And then final checks for fit!
Note: This is one of those times when it hard being a dyed in the wool "lefty" I can't shoot the bow. Sux but true, I tried, we don't even want to talk about how bad it was...My Son came over and test shot if for me.
But now the bow is on it's way to Dano's

There, I nice finished picture on Dano's clean work bench!

And Dano trying my new bow out! He said it shoots pretty good!
So it's off to be my son-in-laws Christmas present!
Thanks Dano for your help. I'll see you again after Christmas.

SoNevada Archer · « **Reply #11 on:** December 13, 2008, 11:41:00 AM »

I forgot to give the details of the bow.
It's made of Walnut, Paduak, Micarta spacers.
It pulls 44#'s @ 28" which is a little light. I am finding now after two of these bows that they are coming in a little light. The next one I build, I will order the next higher poundage so I can reduce down to the weight I want rather than end up light and can't do anything about it!
I don't know how many hours it took, it's too broke up for me to have that figured out. But like knife making, I can feel myself falling victim to yet another passion!
Dang it!!!

kennym · « **Reply #12 on:** December 13, 2008, 11:44:00 AM »

Great lookin bow Ron!!

:D

Dano · « **Reply #13 on:** December 13, 2008, 01:47:00 PM »

Nice job on the Bow and pictorial, your shop looks like a workin man's shop to me, ain't nothin wrong with that. I will have to come over soon to see for my self. I am quite sure your son in law is going to love the bow.

Kenny, I can be persueded pretty easily when they are this purty

SoNevada Archer · « **Reply #14 on:** December 13, 2008, 11:02:00 PM »

Kenny,
Other than it having deeper grain pours, no.
It shaped well and took sanding well, and seems to be holding the finish coats well too.

kennym · « **Reply #15 on:** December 14, 2008, 08:46:00 AM »

Thanks!

Rich Evans · « **Reply #16 on:** December 17, 2008, 11:56:00 AM »

Nice bow Ron, maybe I will get the bug when I get through my issues. We still have to make you a bamboo backed Hickory one as well. Talk to you soon Rich

Jeremy · « **Reply #17 on:** December 17, 2008, 12:31:00 PM »

Nice looking bow!

What really caught my eye though is your grinder... I'm very jealous!

SoNevada Archer · « **Reply #18 on:** December 17, 2008, 03:02:00 PM »

Thanks Rich and Jeremy!
I am looking forward to working on that bow Rich!
Bring over all the fixen's you want, we can store them and use them whenever!
Jeremy, my grinders are the result of my other passion...knife making. Been at that craft for about 16 years.

News:

Author Topic: bow build along continued... (Read 1604 times)

Users currently browsing this topic: