« previous next »
Pages: [1]   Go Down

Author Topic: Selfbow limb width  (Read 992 times)

Offline Boswell

  • Trad Bowhunter
  • **
  • Posts: 124
Selfbow limb width
« on: January 22, 2009, 02:21:00 PM »
What is the narrowest that you have made a osage self bow limb? I am talking right out side of the fade, I like the looks of narrow limb bows wondering how little I can get away with.
Thanks
Boswell
Logged

Offline No-sage

  • Trad Bowhunter
  • **
  • Posts: 483
Re: Selfbow limb width
« Reply #1 on: January 22, 2009, 02:44:00 PM »
Too many variables to answer your question.  

Are you an experienced bowmaker?

What weight do you want?

How long are you willing to make it?

Do you want a speed demon?

How long do you want it to last?
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Selfbow limb width
« Reply #2 on: January 22, 2009, 03:29:00 PM »
I made a 3/4" wide 48" long osage self bow that pulled 45#@22".   Osage doesn't mind being narrow. You could easily make a 1" wide osage bow, 64" to 66" long that would pull 60#"28".
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Okie 1

  • Trad Bowhunter
  • **
  • Posts: 188
Re: Selfbow limb width
« Reply #3 on: January 22, 2009, 03:47:00 PM »
I'm with Pat. It don't take much 'sage to make a bow. I have one that is 7/8" wide and 62" long and pulls 45lbs @ 26". It's the smoothest bow I've built yet.
Logged
Take a kid hunt'n. (If not who'll drag your deer out when you get old?!) Bear Creek Selfbows

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Selfbow limb width
« Reply #4 on: January 22, 2009, 09:00:00 PM »
I made one 1 1/4 inches wide that drew 49# at 26 in. Jawge
Logged

Offline longbowhntr

  • Trad Bowhunter
  • **
  • Posts: 208
Re: Selfbow limb width
« Reply #5 on: January 22, 2009, 09:38:00 PM »
Hey there Bobby, you got to wondering about that "skinny" osage stick we were looking at last night huh. I think it will work. We'll find out in a day or two.

Later David
Logged

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Selfbow limb width
« Reply #6 on: January 23, 2009, 10:53:00 AM »
1" is the narrowest I have made a bow to draw 50# at 27".  It was bendy handled.  I like 1-1/4" a little better.  That seems to minimize set on a rigid handled bow that is 64" or less.
Logged
Take a kid hunting!

TGMM Family of the Bow

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: Selfbow limb width
« Reply #7 on: January 29, 2009, 12:30:00 PM »
I make my bows.One an a half wide I like 66"s long I have went down to 60.I have went down to one an one eight.
  But keep you bow long 68 to 72 you could go down to a inch.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©