Solvent blues!

[Apex Predator]

This is going to sound off topic, but I assure you it's not!

I buy my acetone and lacquer thinner in the one gallon jugs to save money.  I keep smaller cans around for everyday use and re-fill them from the larger ones.  There is no good way to pour from the larger jugs without making a huge, dangerous mess!  Have any of you folks seen a screw on spout that will fit these jugs?  The people at the hardware store looked at me like I had three heads when I asked.

[razorback]

If you turn the jug around and pour it with the handle facing away from, you may be able to control the flow a ittle easier. Grip the neck of the jug and put your fingers through the handle. Sounds strange but can really work.

[2treks]

I do the same thing. I get a plastic jug or a metal can, and then put it in a smaller bottle or qt.can. If you pour the plastic jug "backwards" like razorback said or pour either of them out the side of the spout it will help. As the  1 Gal. jugs get empty the job gets easier. A funel will help also. That first "GULP" of air is the killer.
Chuck

[Pat B]

You might try a siphon pump, like used for gasoline. It has a squeeze bulb for pumping the liquid.

[TNstickn]

I use a siphon pump to pump kerosene from a 5 gal can to my little space heater. works with no mess.
You can usually pick one up for 6-10 bucks at the same places they sell indoor space heaters and the clean burning fuels. For me thats Home depot or Lowes.

[Apex Predator]

The problem is the size of the cap.  I would love to find a screw on pour spout to fit these cans.  I really hate to slop that stuff all over my shop.

[No-sage]

Coleman makes a spout for the white gas cans.  It should work for your need, depending on the threads on the can.

  Coleman Spout

[Greg Szalewski]

We have a snap on funnel here at work for those steal cans. Don't know where it came from but someone makes them.

[Apex Predator]

Bingo!  I think No-sage has hit the jackpot!  Thanks guys.