Author Topic: 64" d/r buildalong for Brandon DONE !! (Read 3649 times)

razorsharptokill · « **Reply #40 on:** April 20, 2009, 10:28:00 PM »

You said 1 3/4 cup.. is that an actual measuring cup or one of the little cups seen in the pic?

kennym · « **Reply #41 on:** April 20, 2009, 10:41:00 PM »

That is 1.75 of those little white plastic(no wax!!) cups,about 1/4" from top of the second one.

My wife wonders how we go thru those so fast!

Sanded and sealed riser with CA tonite ,really brings the coco to life!!!

razorsharptokill · « **Reply #42 on:** April 20, 2009, 10:48:00 PM »

I use the little plastic pee cups from the prison, they are marked in oz's. They are about the same size.

kennym · « **Reply #43 on:** April 20, 2009, 10:51:00 PM »

New ones ,right? LOL

That is 1.75 cups of each component. Might get by with less,but I figure you can't put more in later if it needs it!

razorsharptokill · « **Reply #44 on:** April 20, 2009, 10:57:00 PM »

Yeah definetly! When I get a little further on my buddy's T/D/ recurve I'll get started on MY bow. Can't wait!

TNstickn · « **Reply #45 on:** April 20, 2009, 11:18:00 PM »

I use the white dixie cups also. My wife is always gettin on the kids about using them up so fast. :rolleyes: Just adds to the "wasnt me" mystery.

mox1968 · « **Reply #46 on:** April 21, 2009, 05:14:00 AM »

how do you make the lams in the bandsaw?I cant really see from the photo,great build by the way...

Apex Predator · « **Reply #47 on:** April 21, 2009, 09:59:00 AM »

Great job Brother! I'm enjoying this one. I have to get me one of those lasers!

rkmnt2 · « **Reply #48 on:** April 21, 2009, 05:58:00 PM »

Nice build Kenny! The laser looks so....futuristic! lol

kennym · « **Reply #49 on:** April 21, 2009, 08:51:00 PM »

Mox, I cut the lams on the bandsaw,then run thru a thickness sander. On the tapers,I run the proper sled(.001"per "..002" per" etc.) along with the stock so I have a tapered blank to grind.

Marty, the laser rocks,I think if the bow is level across the limbs,you won't get it any straiter. If out of level,I think it will lead you astray tho.

rkmt, that is why I've been expecting to be raided by the trad police!!

ChristopherO · « **Reply #50 on:** April 22, 2009, 01:05:00 PM »

Trad Poleece, hear: As long as you ain't using that funny little red lite on an all wud bow then wheel jist have to keep lookun the other way.

kennym · « **Reply #51 on:** April 22, 2009, 09:30:00 PM »

I also used the laser to mark the marks for limb layout lines,cause if you don't get your yardstick clamped flat on the limb,it can be not strait!

Kenny, aka multiple offender... :D

kennym · « **Reply #52 on:** April 25, 2009, 05:11:00 PM »

Hope he likes it!! If not I will!!!

Dano · « **Reply #53 on:** April 25, 2009, 06:54:00 PM »

Great job Kenny, that is a sweet lookin bow. If he don't like it, send it to me and I'll make payments

TNstickn · « **Reply #54 on:** April 25, 2009, 10:26:00 PM »

kennym · « **Reply #55 on:** April 25, 2009, 11:07:00 PM »

Dano,I may have to break it in for him a bit. Wanna shoot it at Mojam??

Did y'all notice the inspector is cuttin me some slack? She stays close to the pond when its 75 out!

BenBow · « **Reply #56 on:** April 25, 2009, 11:27:00 PM »

Very nice Kenny.

Greg Szalewski · « **Reply #57 on:** April 26, 2009, 07:30:00 AM »

Wow, that is one sharp looking bow.

Dano · « **Reply #58 on:** April 26, 2009, 09:37:00 AM »

I'd like that Kenny. She's a pretty smart dog.

mox1968 · « **Reply #59 on:** April 26, 2009, 04:50:00 PM »

wow fantastic looking bow!!!!love the finished article.fabulous....

News:

Author Topic: 64" d/r buildalong for Brandon DONE !! (Read 3649 times)

Users currently browsing this topic: