Good one! That bow looks like it will hunt to me.
I like to use a limb layout that stays full width for 1/3 to 1/2 of the distance from fade to tip, THEN taper to the tips. This will give you more of an elliptical arc - less bend near the handle.
It looks like you have a slight hinge then a flat spot in the upper limb just above the fade. One method I use to double check my tiller is to trace the limb on a big piece of paper and then flip the bow around and see if the other limb matches the tracing.
Most excellent full draw pictures! Many folks show a full draw of about 24" and it is tough to see the real working tiller. You have that bow pulled all the way.