Author Topic: will it work or not all glass lamination bow limbs  (Read 1410 times)

Offline Loren Piper

  • Trad Bowhunter
  • **
  • Posts: 34
Re: will it work or not all glass lamination bow limbs
« Reply #20 on: September 11, 2009, 05:12:00 PM »
I want to thank BenBow for taking the time to post these pic for me the upper limb is all glass the lower is standard wood core and glass outside we have shot over 100 arrows and the upper limb is still in good shape, W did make a upper limb with osage core on the upper it turned outa 37# and it broke on the second pull at 25 inch pull.

Offline Loren Piper

  • Trad Bowhunter
  • **
  • Posts: 34
Re: will it work or not all glass lamination bow limbs
« Reply #21 on: September 12, 2009, 08:47:00 AM »
We are going to end the free core offer Monday any orders after that will have to Pay $ 8.50 for a 36 inch core strip. our web page is  www.lorenpiper.com  for ording.

Offline Loren Piper

  • Trad Bowhunter
  • **
  • Posts: 34
Re: will it work or not all glass lamination bow limbs
« Reply #22 on: September 15, 2009, 05:05:00 PM »
I whant to thank ever one that give me their veiws on this glass core and Ben Bow for posting my pictures on this sight One thing I found out there is still some bow builder out there that want to test things to make their bow a little better, I will say the glass core will add better chances of you bow not breaking, then any wood and I believe it is more stable and you dont have to worry about moisture, I believe it improved the performance of the Bow.

                      Thanks Loren Piper

Offline wihill

  • Trad Bowhunter
  • **
  • Posts: 831
Re: will it work or not all glass lamination bow limbs
« Reply #23 on: September 16, 2009, 07:04:00 PM »
Man if I was pulling that bow back I'd have a hard-hat on, Loren.  That's some pretty neat stuff!
Support the sport!

Offline Loren Piper

  • Trad Bowhunter
  • **
  • Posts: 34
Re: will it work or not all glass lamination bow limbs
« Reply #24 on: September 16, 2009, 07:56:00 PM »
wihill    You won't believe it but I put that same bow in our cherry picker ( a engine hoist) modified for bow testing and pulled it till the string was ready to come off the limb, so see this old man is not that brave.it was unreal.

Offline Loren Piper

  • Trad Bowhunter
  • **
  • Posts: 34
Re: will it work or not all glass lamination bow limbs
« Reply #25 on: September 24, 2009, 09:07:00 PM »
The all glass core is on my web sight for them that would like to use it   www.lorenpiper.com

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©