Author Topic: ash self bow  (Read 491 times)

Offline Lee Lobbestael

  • Trad Bowhunter
  • **
  • Posts: 489
ash self bow
« on: September 11, 2009, 08:20:00 AM »
What causes ash bows to get those small cracks in the belly. crysels I think they are called. and how do you prevent them?

My last ash self bow developed them so I stopped shooting it before it broke. It did not have an aggressive design but may have stressed it to soon after heating it. I would like to make another and don't want to repeat this.

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: ash self bow
« Reply #1 on: September 11, 2009, 09:16:00 AM »
Lee, ash is weak in tension and has to be really overbuilt. Make it longer or wider or both. IMHO. I've never heat treated so I can't advise on that. Jawge

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: ash self bow
« Reply #2 on: September 11, 2009, 09:17:00 AM »
Also the tiller has to be pretty darn near perfect. Jawge

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: ash self bow
« Reply #3 on: September 11, 2009, 05:37:00 PM »
I have trouble with ash fretting also. Try to get your bends more even and see if that helps. Ash, like other white woods usually is improved by heat treating. It adds a bit more compression strength.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©