Author Topic: Rasp  (Read 661 times)

Offline K. Mogensen

  • Trad Bowhunter
  • **
  • Posts: 1077
Rasp
« on: December 11, 2009, 07:23:00 PM »
Hey, I'm lookin for a good all around rasp that could do it all, from shaping the riser area to tillering. However, I really don't have a lot of money. I know ya'll like the Nicholson 49-50 and the UBR 10 but man, they're so expensive. I was looking at a simple Farrier's rasp and wondered if that would do the trick. Or the Nicholson 4 in 1 rasp.

Offline Russell S.

  • Trad Bowhunter
  • **
  • Posts: 230
Re: Rasp
« Reply #1 on: December 11, 2009, 07:51:00 PM »
i have a four in one "hobby rasp" from sears, i think it was 9$ i love it.  i have not used any fancy ones but it has worked great on risers, tips and to trap limbs.
does everyone else look up when someone yells "DUCK!!"?

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Rasp
« Reply #2 on: December 11, 2009, 09:23:00 PM »
A farriers rasp is a good bow building tool. Only problem is it is flat. A half round  or a 4 in 1 along with the farriers rasp will get you a ways down the road for not much money. If you know a farrier you might get a used one from him for free. They use them just so long before they replace them.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline K. Mogensen

  • Trad Bowhunter
  • **
  • Posts: 1077
Re: Rasp
« Reply #3 on: December 11, 2009, 11:32:00 PM »
Thanks you guys. Ya'll have been a big help with all my questions. I appreciate it.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Rasp
« Reply #4 on: December 11, 2009, 11:39:00 PM »
Yeah Pat I wasa farrier for about five or six years and I went through a rasp every 20 horses. They get a little dull after that and don't remove hoof material as fast as a new one. They where still plenty sharp enough for wood.
 
 You can get a good farriers rasp for about 20$ brand new at a local farm supply store like Rural king or Tractor Supply. The upper brand farries rasp will cost you 30 or 40 bucks and wouldn't be worth the money in my opinion. I tried them all and the upper end ones only got me through ten more horses or so.
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Rasp
« Reply #5 on: December 12, 2009, 08:51:00 AM »
The farriers rasp I have was given to me 10 years ago by a farrier; one he was throwing away. It will still take the hide off your knuckles if you are not careful!
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline pappysc2001

  • Trad Bowhunter
  • **
  • Posts: 8
Re: Rasp
« Reply #6 on: December 12, 2009, 09:34:00 AM »
My vote is for the 4 in one. It has been invaluable.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Rasp
« Reply #7 on: December 12, 2009, 10:45:00 AM »
I've had the hide gone plumb down to knuckle on more than one occasion. LOL
I also agree with pappy, the 4 in one is indespensible. I use it alot when I make turky calls.
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline K. Mogensen

  • Trad Bowhunter
  • **
  • Posts: 1077
Re: Rasp
« Reply #8 on: December 12, 2009, 03:02:00 PM »
Well, I think I'll go with both. I can get both for about 20 bucks. Thanks again.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Rasp
« Reply #9 on: December 13, 2009, 10:07:00 AM »
Watch them Knuckles and have fun, Kris
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline K. Mogensen

  • Trad Bowhunter
  • **
  • Posts: 1077
Re: Rasp
« Reply #10 on: December 13, 2009, 05:34:00 PM »
Yeah, I've heard of people taking the meat off of em down to the bone.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©