Yes I am spraying it Bill. Here is my long finishing process currently. Im not sure how to do it better or faster, but any advice from anyone would be appreciated:
1. Finish sand
2. Seal the open grain riser woods with super glue and sand
3. Seal the whole riser with High Solids Vinyl sealer, sand
4. Wipe on or spray on the first cost of TB -Gloss, buff with steel wool
5. Notice the open grain that still isnt filled, so I fill it with TB gloss with my finger, sand lightly...then generally do this step 2 more times.
6. Spray on a light coat of TB gloss, buff with steel wool....do this about 3 times
7. Frost the last coat fo Tb gloss, which makes it almost appear satin.