Author Topic: Hickory tiller check (FINISHED)  (Read 520 times)

Online Magnum in Ms

  • Trad Bowhunter
  • **
  • Posts: 293
Hickory tiller check (FINISHED)
« on: May 02, 2010, 04:31:00 PM »
Hickory stave bend in handle bow. 56lbs@26  63"ntn 1 1/4" wide in handle. Still have to finish it out .Just wanted an opinion or two on the tiller. After I look at the pic ,looks like upper tip may be a little stiff. What yall say?

   
Every one is ignorant its just on different subjects

Offline walkabout

  • Trad Bowhunter
  • **
  • Posts: 1057
Re: Hickory tiller check (FINISHED)
« Reply #1 on: May 02, 2010, 04:47:00 PM »
i agree the upper limb is stiff, mostly the last 2/3. the fade is also a bit stiff, giving most of the bend toward the center of the limb. if you have a photo editor program an easy check is to snap a straight line from fade to tip and reference the distances from the line to the limb in the picture. id work the limb tip more till it bends evenly then work the fades last as they dont need to bend much. looks good though, the full "D" shape of the bend through handle is certainly a very graceful form. good luck, keep us posted.
Richard

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Hickory tiller check (FINISHED)
« Reply #2 on: May 02, 2010, 09:14:00 PM »
Upper limb needs some from the handle to midlimb.  Other than that it looks OK to me.
Take a kid hunting!

TGMM Family of the Bow

Online Magnum in Ms

  • Trad Bowhunter
  • **
  • Posts: 293
Re: Hickory tiller check (FINISHED)
« Reply #3 on: May 03, 2010, 08:40:00 PM »
Finished it up today.My third bow and it turned out ok. That white hickory just looked to plain so I dressed it up a little . A friend gave me some leather dye and I tried it out, worked pretty good. The hickory would not take the wood stain worth a hoot. i used black,red and buckskin. Osage tip overlays and arrow rest. 63"NTN 54lb@26" Shoots good.

 

 

 

 

 
Every one is ignorant its just on different subjects

Offline David Holt

  • Trad Bowhunter
  • **
  • Posts: 98
Re: Hickory tiller check (FINISHED)
« Reply #4 on: May 03, 2010, 08:49:00 PM »
GREAT JOB!!!
HMC(SS/SW) David Holt
Submarine Force Independent Duty Corpsman
HOO-YAH

Offline Igor

  • Trad Bowhunter
  • **
  • Posts: 974
Re: Hickory tiller check (FINISHED)
« Reply #5 on: May 03, 2010, 09:10:00 PM »
Nice!

How about a close up of the riser and tips!


Thanks for sharing

><>

Glenn
Trust in the Lord with all your heart and lean not on your own understanding In all your ways submit to him and he will direct your paths

Online Magnum in Ms

  • Trad Bowhunter
  • **
  • Posts: 293
Re: Hickory tiller check (FINISHED)
« Reply #6 on: May 03, 2010, 09:35:00 PM »
Tips and Handle

 

 

 
Every one is ignorant its just on different subjects

Offline walkabout

  • Trad Bowhunter
  • **
  • Posts: 1057
Re: Hickory tiller check (FINISHED)
« Reply #7 on: May 04, 2010, 01:57:00 AM »
wow turned out very nice.love the accents,they seem like they were definitly meant to be there good job
Richard

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Hickory tiller check (FINISHED)
« Reply #8 on: May 04, 2010, 04:58:00 PM »
Sorry, you'll have to sand off that finish and scrape that upper limb 3 more times.  Shame too but that's what you get for not asking a final time  :)

Sweet job!
Take a kid hunting!

TGMM Family of the Bow

Offline bigcountry

  • Trad Bowhunter
  • **
  • Posts: 1027
Re: Hickory tiller check (FINISHED)
« Reply #9 on: May 04, 2010, 05:20:00 PM »
Hows the handshock on that bow?  I want to build a D-bow myself.

Offline Pete W

  • Trad Bowhunter
  • **
  • Posts: 951
Re: Hickory tiller check (FINISHED)
« Reply #10 on: May 04, 2010, 07:35:00 PM »
Nice looking bow.  :)  

Pete
Share your knowledge and ideas.

Online Magnum in Ms

  • Trad Bowhunter
  • **
  • Posts: 293
Re: Hickory tiller check (FINISHED)
« Reply #11 on: May 04, 2010, 09:39:00 PM »
Thanks for the comments guys

 bigcountry   hand shock is not bad but does feel different to shoot. This is my first bendy handle bow so it may take a little to get used to. The piece of hickory was barely big enough to get a 1 1\\4" bow out of so I thought I would try one.
Every one is ignorant its just on different subjects

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Hickory tiller check (FINISHED)
« Reply #12 on: May 05, 2010, 12:20:00 PM »
Looks really great! For the next round the 4 corners up a bit to small pea size so splinters are not raised. Jawge

Online Magnum in Ms

  • Trad Bowhunter
  • **
  • Posts: 293
Re: Hickory tiller check (FINISHED)
« Reply #13 on: May 05, 2010, 12:34:00 PM »
Ok Thanks George
Every one is ignorant its just on different subjects

Offline ishi1archer

  • Trad Bowhunter
  • **
  • Posts: 199
Re: Hickory tiller check (FINISHED)
« Reply #14 on: May 05, 2010, 01:16:00 PM »
Nice wook great looking bow!!!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©