Flat Clear Finish for camoed Bow Limbs

[ArrowCrester]

I have just camoed the U/L limbs of a Fred Bear Kodiak T/D recurve…………….

It came out great, but now i want to seal it BUT want the finish to be FLAT, just like the limbs are now.( NON REFLECTIVE surface.)

What is the best product to use??

Thanks,
                       

[Pat B]

I use a quick spray of satin poly on all my hunting bows. I use Tru-Oil for a finish and it has a high gloss. The satin poly dulls it right out.

[ArrowCrester]

Pat B..

Are you talking about  satin Poly from Minwax ????

And does it go FLAT FLAT or does it have some sheen to it?

Tx's

[Pat B]

Bob, I use Defthane Clear Satin Polyurethane now but have used other satin polys all with the same dulling results. Do a test first to see if it is good for you. It has to dry before the "satin" really shows up. It is plenty flat enough for my hunting bows.

[JD_Archer]

minwax makes a spar urithane that is very weather risistant and comes in a rattle can.

[Pat B]

I only use the spray poly to cut the shine on my hunting bows. I get good enough protection from the Tru-Oil but it cures out with a high gloss. One quick spray of the satin poly really cuts that shine!

[ArrowCrester]

Thanks Guys