Spray Hood building in process

[T Folts]

I started building a spray hood in my basement so I could spray bows year round. This is vented out side thru a basement window. I work in a lab and got the top from work. I took all the dimensions from a 4 foot hood and copied and modified the duct work.
 
 

[recurvericky]

Keep the pictures coming. I am interested in doing the same.

[T Folts]

I used 8" duct for the intake and out. I have a squirrel cage on the right side in a sealed box. The motor is on the outside of the main chamber and a belt passes through a barrier so I will be seperate from any fumes (explosion proof).
I plan on mounting a light in the top sealed from the hood area, again (explosion proof).
I'll post more photo's as I go.

[fish n chicks]

I can kinda tell that it is about 5' wide or wider from the ceiling tiles, but what was the final width you went with?

[T Folts]

The inside is 62 inches

[T Folts]

Update
The hood is finished for the most part and works very well. I did a test run with it last night spraying lacquer thinner. I'll post pics after church.