Author Topic: TG BOW SWAP 2011 (pics and post) (Read 51407 times)

KellyG · « **Reply #800 on:** March 21, 2011, 06:41:00 PM »

looks good NTD

jsweka · « **Reply #801 on:** March 21, 2011, 07:31:00 PM »

NTD - looks good to me. Whoever ends up with it will be happy!

Pat B · « **Reply #802 on:** March 21, 2011, 07:43:00 PM »

Nice bow Nate. Too bad it came in under weight. You could add a thin osage or ipe lam to the belly and retiller it. I gained about 10# on a 60" osage static recurve and it didn't take much of a lam to do it.
OH! and nice boo also! d;^)

Dan Landis · « **Reply #803 on:** March 21, 2011, 07:57:00 PM »

NTD, I agree with the others, looks good to me also....Dan

NTD · « **Reply #804 on:** March 22, 2011, 12:52:00 AM »

Well I appreciate it guys.

Pat, the underlay is a good idea but considering I was going to make a bow for this other fella I'll set this one aside for him. You know him Pat, he sent me an incredibly unexpected gift recently.

Oh yeah, the boo was great. Those were two excellent pieces you sent me.

Keenan · « **Reply #805 on:** March 22, 2011, 10:58:00 AM »

Nate that bow looks great. I don't know about your trade person but I know that I shoot several different weight bows and wouldn't be dissapointed with a few pounds under.
Very sweet looking bow.

b.glass · « **Reply #806 on:** March 23, 2011, 05:43:00 PM »

This bow still came in under weight even after piking it. 42# @ 28". I'm thinking about an underlay like Pat suggested for Nate. I'm thinking about a tapered lam from 3RA. They have walnut, bocote, cocobolo, purple heart, sapele, teak burma and wenge in .065" tapering to .001". They also have osage, zebra, red elm and bamboo in .060" to .001".

Does the lam need to have straight grain? The walnut would have good compression strength also the osage and elm any of them would look good too.

Pat B · « **Reply #807 on:** March 23, 2011, 11:21:00 PM »

Straight grain would be best but the compression side isn't as picky as the tension side. I'd also go with the osage. Some of those tropicals might have good compression values but I've not used them.
The lams I used were scraps that were given to me. I just sanded one side smooth, sanded the belly flat and smooth, glued them down in reflex and retillered the bow.

Roy from Pa · « **Reply #808 on:** March 23, 2011, 11:47:00 PM »

The bottom limb looks great, but the top limb needs a little work. But your already under your weight. Tiller it out for someone else and make another bow. Or add a belly lam. They sure bump up the weight.

b.glass · « **Reply #809 on:** March 24, 2011, 09:48:00 AM »

Thanks guys. The picture isn't the best but I thought the upper limb looked like it needed some more work also. I agree with Pat on the osage, or maybe elm. And I was mistaken on the thickness of the lams. I can get the osage or elm in a .095" thickness so I will go with that.
I don't work with decimals much so I figured it out to be about 3/32".
I've never tried this before. Should be interesting.

Dan Landis · « **Reply #810 on:** March 24, 2011, 12:46:00 PM »

Just got back from the post office, mine is shipped. Could arrive at destination Saturday or early next week. Had to shoot her a few more times this morning in the rain and snow before sending her on her way, neighbors probably think I'm crazy, oh well.....Dan

formerbutcher · « **Reply #811 on:** March 24, 2011, 01:43:00 PM »

b.glass · « **Reply #812 on:** March 24, 2011, 02:14:00 PM »

I'm back home with my lams. I found some flat grained osage and they are 1 1/2" wide. The bow is a flat bow and the lams are about 1/16 shy on each side of the lams of being as wide as the bow at the fades. It will have more of a crowned belly which it isn't suppose to be for a pyramid design but I don't think it will hurt anything really.

KellyG · « **Reply #813 on:** March 24, 2011, 03:48:00 PM »

Dan I will update my records to show you as shipped.

Can't waite to see your progress B

fish n chicks · « **Reply #814 on:** March 25, 2011, 12:38:00 PM »

Hey Kelly how many bows have found their home so far?

KellyG · « **Reply #815 on:** March 25, 2011, 07:07:00 PM »

At my count stiks, 8 bows have been recieved, I dont think I missed any, and 1 enroute.

Goose Gossett · « **Reply #816 on:** March 25, 2011, 07:51:00 PM »

Just a thought but could we start a thread for the received bows. I would love to have a post with a picture and recipient of the bow at full draw just to get an idea of what everyone has been given. I'm sure I'll get lost trying to find them otherwise. Could be a potential reference that would be easy to obtain pictures from if someone wanted to document or follow up with what has been given.

Dick in Seattle · « **Reply #817 on:** March 25, 2011, 09:01:00 PM »

Good idea, Goose....this thread gets pretty involved to go looking for just the finished bows.

formerbutcher · « **Reply #818 on:** March 25, 2011, 09:13:00 PM »

Great idea !

Pat B · « **Reply #819 on:** March 25, 2011, 11:48:00 PM »

As soon as whomever is making my bow sends it to me( d;^) ) I'll start a thread unless someone else wants to star it!

News:

Author Topic: TG BOW SWAP 2011 (pics and post) (Read 51407 times)

Users currently browsing this topic: