Author Topic: Started first bow build! Final pictures of frist bow build, BOW COMPLETLY DONE!  (Read 4393 times)

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
:thumbsup:
 

Second nock not to bad!   :)
   

More to come.
Always say what you mean, that way people will know you mean what you say.

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
Ok, here we go again.   ;)  

Working on the handle area    ;)
 

Dang got to run, got a phone call I have to take, I will return soon.     :wavey:
Always say what you mean, that way people will know you mean what you say.

Offline Savage

  • Trad Bowhunter
  • **
  • Posts: 238
Good job! You have alot more patience than I do.
US Army
Kosovo - 2005
Iraq - 2008

Offline Goose Gossett

  • Trad Bowhunter
  • **
  • Posts: 449
Pretty bow you have in the making!
He made my mouth like a sharpened sword, in the shadow of his hand he hid me; he made me into a polished arrow, and concealed me in his quiver. Isaiah 49:2

Offline NYArrow

  • Trad Bowhunter
  • **
  • Posts: 372
Looks good so far.
Choose this day whom you will serve...as for me and my house, we will serve the LORD.
Joshua 24:15

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Looking nice, good job.

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
Always say what you mean, that way people will know you mean what you say.

Offline greyhawk39

  • Trad Bowhunter
  • **
  • Posts: 160
She looking good,can't wait for the final project.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Looken good, got a kick out of the video:)

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
:thumbsup:
 
 

On the middle picture you can see dirt of the end of what was part of a knock, that was, or I think it was the piece that struck me and then stuck in the ground.   :dunno:
Oh well not use in    :deadhorse:
Always say what you mean, that way people will know you mean what you say.

Offline KochNE

  • Trad Bowhunter
  • **
  • Posts: 77
Phillip, do you have any Urac?  Some (most) will call me crazy (stupid), but the bow I'm finishing right now has a top limb that has tried numerous times (3 to be exact) to "finish" itself, as yours did.  I thought about splicing a new limb at the handle, but I'm kind of (really) stubborn (stupid) and wanted to test the strength of the Urac I just received.  I put plenty of Urac on the pieces, fitted them together, and held them with rubber bands while it cured.  Then I backed it with bamboo, again using Urac 185.  

My curiosity (stupidity) has paid off now, as I'm finish sanding a beautifully tillered (for my stupid self anyhow) 45# @ 29" bamboo-backed-maple bow for my brother.  (I don't want to be the one shooting it in case it decides to "finish" itself again.)    ;)     Decided to name it "Plan A" as in the status given to prisoners on suicide watch when I worked at the prison.  

Also, Dean Torges has a repair-along on his website where he sands out a pin knot that caused a belly fret and replaces it with good wood.

   http://bowyersedge.com/patch.html  

If you're as stubborn (stupid?) as me... this dead horse might just rise to be beaten again    ;)
"As iron sharpens iron, So one man sharpens another."  Proverbs 27:17

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Thats always disappointing but happens to all of us. You seem to have the right attitude to be a success at this. Just a question, was the break started at the mid point of the right limb in the video. May just be the geometry of the limb but it looks to have a slightly inconsisten bend right there. Was my guess for where it blew.
Glad to hear that you didn't get injured.
keep making them shavings.
Keep the wind in your face and the sun at your back.

Offline longbowhntr

  • Trad Bowhunter
  • **
  • Posts: 208
All I can say is you should have been there!!!

After making sure Phil didn't need stitches or anything along those lines...  :scared:    :scared:    :scared:  

It was pretty funny.. the look on Phil's face was .....(and I'm sure mine had the same look)
What do you say?? Stuff happens!

All total I think the bow had close to 75-80 shots thru it if you count the half draw shots etc. working up to full draw. It gave no warning (other than the slight "tic" a half second before she blew)

It sure was a sweet shooting bow while it lasted.
 
David

Offline kountzer0

  • Trad Bowhunter
  • **
  • Posts: 47
I'm glad you're OK.  maybe I won't last long at this cuz it hurts just thinking about that.  Hats off to you sir!

Looking at the video about 6 times though I'd like to guess:  It looks like just past the 2nd knot on the right limb there is a bit of a hinge developing just inside a flat spot.  it looks minor, but doesn't bend the same every time?  I'm just starting to train my eyes for this so I could be very wrong.

Sorry it ended that way!
Greet every morning with a smile. That way it won’t know what you’re planning to do to it - Brandon Sanderson

Offline vanillabear?

  • Trad Bowhunter
  • **
  • Posts: 748

Offline Ricky Wallace

  • Trad Bowhunter
  • **
  • Posts: 185
We all have some broken ones hanging in the shop!! I have at least 6   :bigsmyl:   Sorry that happened to you it was purty!!     :)
If you expect nothing from anyone,you will never be dissapointed. Watch,Listen,Learn U.S.ARMY  '86 '91

Offline 1oldbowguy

  • Trad Bowhunter
  • **
  • Posts: 614
Looking at the bow, in it's new form, 3 piece take down   :bigsmyl:  it doesn't seem to have any thing to do with what was the flat area.  We had tilled that out to where it was bending very well it that area.  We have looked and talked about it and just seems to be the way things go with wood.   :thumbsup: , not with the same results that is.   :biglaugh:
Always say what you mean, that way people will know you mean what you say.

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Sorry that happened to your bow 1oldbowguy. It was really looking good too! Glad no one was injured.

Hard to really know the "why" of things sometimes, but before I got to this page, I noticed you had some aluminum foil under your limb as you were heating it. That kinda worried some. Then I turned the page.........oh no!

Last thing you want to do is get blow-back, or any scorching on the back of the bow, IMO of course. If I had to guess, I'd have to say that the MC of the back of your bow was to low. Either that or the heat reflecting off of the foil make the back off your bow brash........Art

Offline Lee Slikkers

  • Trad Bowhunter
  • **
  • Posts: 237
Damn bud, that pretty much stinks...I know it happens and is all part of the journey but I bet that doesn't make it any easier to experience.  I have yet to complete a bow and know "day" is coming sooner or later...something I'm sure I'll take with less grace than you have shown.

I loved that bow with all the character knots and such on the back...was a real sweet looker.

Regards,
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
I feel for you, oldbow! Was looking great, too. Glad you weren't hurt seriously. Better luck with the next one.
Stan

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©