Author Topic: The continuous story of "Elkie".  (Read 2060 times)

Offline snag

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6337
Re: The continuous story of "Elkie".
« Reply #40 on: February 10, 2011, 06:01:00 PM »
I thought you were suppose to let the hideglue cure for several weeks before stringing it....? Just asking, what do I know about it. This is all new to me!
Isaiah 49:2...he made me a polished arrow and concealed me in his quiver.

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: The continuous story of "Elkie".
« Reply #41 on: February 10, 2011, 06:07:00 PM »
Sorry to hear that Pat. Sinew takes a lot of time... man that sucks.   :banghead:
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: The continuous story of "Elkie".
« Reply #42 on: February 10, 2011, 06:19:00 PM »
This bow just didn't want to be sinewed. The first sinew job when I originally made the bow back in 06 was on bare wood with Knox. I tried hide glue on bare wood again with this most recent sinewing and it failed. I tried the TBIII over varnish and it failed(Art Butner has used this method successfully). Only about a 4" spot just out from the fade came loose. While I removed the sinew it was difficult to remove from everywhere else. In some spots the glue was still attached well to the varnish and in other spots it all came off to the wood.
  I have no doubt that I can get rawhide to stick so that's where I stand now. I'm going to get a new bottle of TBIII before I put the rawhide down.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: The continuous story of "Elkie".
« Reply #43 on: February 10, 2011, 06:52:00 PM »
I see that you wrapped the bow Pat but did you also clamp or rubber strap it down? TB glue does require a certain amount of clamp pressure for maximum results.........Art

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: The continuous story of "Elkie".
« Reply #44 on: February 10, 2011, 11:28:00 PM »
I just used the cloth wrap like I use on rawhide or snake skin backings, Art. It's behind me now. Rawhide back coming tomorrow after I get a new bottle of TBII or TBIII. I think she will be at least 50# without the sinew backing. The rawhide is only because I toothed the back and being thin ringed osage I feel safer with a rawhide backing. She may yet get her chance at an elk. If Elkie is happy, we are all happy! d;^).
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline CaptainJ

  • Trad Bowhunter
  • **
  • Posts: 185
Re: The continuous story of "Elkie".
« Reply #45 on: February 11, 2011, 12:36:00 AM »
Head 'em up! Move 'em out! Rawhide!
Go Elkie!
CJ

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: The continuous story of "Elkie".
« Reply #46 on: February 11, 2011, 09:06:00 AM »
Even at 50# and with those bamboo arrows of Kenneth that should work quite well for elk I would think Pat........Art

Offline ron w

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 13849
Re: The continuous story of "Elkie".
« Reply #47 on: February 11, 2011, 12:55:00 PM »
Pat B.......you are amazing, I would have thrown in the towel on the 4th or 5th  redo. I hope it works and and sends an arrow right thru an Elk...   :thumbsup:
In the beginner's mind there are many possibilities. In the expert's there are few...So the most difficult thing is always to keep your beginner's mind...This is also the real secret of the arts: always be a beginner.  Shunryu Suzuki

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: The continuous story of "Elkie".
« Reply #48 on: February 11, 2011, 01:09:00 PM »
Well pat this is one for the story books. I just wish you could find out why this one did not like the glue.
CaptainJ,
I have an aunt, uncle and cousin in Grand Jucntion. Small world.
Kelly

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: The continuous story of "Elkie".
« Reply #49 on: February 11, 2011, 01:31:00 PM »
Kelly, I'm curious too but at this point I ain't gonna worry about it...on this bow. I know now things to do and not to do the next time I decide to build a sinew backed bow. Even though it's been disappointing and discouraging at the time Elkie may show all of us just what she is made of. d;^)
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline CaptainJ

  • Trad Bowhunter
  • **
  • Posts: 185
Re: The continuous story of "Elkie".
« Reply #50 on: February 12, 2011, 11:09:00 AM »
Quote
Originally posted by KellyG:
CaptainJ,
I have an aunt, uncle and cousin in Grand Junction. Small world.
Kelly
Wow, it sure is!
Be sure to look me up if you ever get out this way.
Dinner's on me! Thanks for your service.
CJ

Offline b.glass

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3098
Re: The continuous story of "Elkie".
« Reply #51 on: February 12, 2011, 11:24:00 AM »
We will wait with baited breath for a pic of you, Elkie and an elk!
B.Glass, aka Mom, aka Longbowwoman
Gregory R. Glass Feb. 14th, 1989-April 1st, 2007; Forever 18.
TGMM Family of The Bow
Mark 5:36 "Don't be afraid, just believe".

Users currently browsing this topic:

0 Members and 6 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©