This weekend I began work on a white ash blank that my father gave me. More accurately, he ran to the local lumber yard, picked out a board, and cut me a blank on his bandsaw. I think he got a little too excited because the blank is not so hot for making a longbow. The grain isn't quite straight and the back is by no means one continuous growth ring. Still, I figured I'd work it just to get the feel of the wood on my drawknife, fully expecting to maim the blank. To my surprise I did have some success. The limbs are both about floor tillered with even bend throughout. Maybe the old man knew what he was doing. Now I feel a little invested in this piece and I would like to see it survive.
I made the judgement early on that if this bow is going to survive it's definitely going to need a backing. I have access to hickory, so I figured I'll use that, but I'm open to other suggestions. Also, should I back the bow now before I move ahead with further tillering, or should I keep removing wood and praying that the back doesn't give way? I'm open to any and all suggestions.