Mohogany riser?

[tarponnut]

They trimmed some mahogany trees today at the school where I teach. The guys were kind enough to save me some limbs.
I'm new to bow building and wondered if anyone here has worked with mohogany?I'm not sure of the mahogany species but these trees are all over Miami-Dade county.
I was thinking of using it for risers?
Thanks.

[Robertfishes]

Not sure if that's a good riser wood, but you should seal the ends of your pieces to help control checking and splitting of your pieces..you will have to get moisture content down to 8%?? or so .. maybe someone with more experience will post ..I used titebond wood glue to seal the ends of  a piece of hickory a few years ago. You might have to add a few pieces of glass or an I beam to make a strong riser. I have heard that mahogany can be brittle. I did a search and found that the mahogany you have is likely West Indian mahogany or Cuban Mahogany, didn't find alot of info on it other than it was used in the cabinet and furniture industry

[John Lipinski]

the one bow I used it in snapped on me. I wouldn't use it again.

It doesn't do well in compression at all, and formed chrysals.

[Red Tailed Hawk]

I found mahogany to be brittle.

[Mike Mecredy]

I've used it for kids sized bows.  but those are only around 15-20#.  I wouldn't used it on anything heavy.  Too soft and brittle.

-Mike