Author Topic: Which end for a nocking groove  (Read 713 times)

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Which end for a nocking groove
« on: July 25, 2011, 05:23:00 PM »
I want to put a nocking groove on my trade bow. They always seem to make stringing the bow easier. However I am confused as to which end to put it. To my logic the bottom would be the correct end as the string should stay in the groove at the top if you lean the bow against the wall unstrung, and then put the string in the bottom groove. However it seems that the rest of the world think differently to me and I'm wondering how sooooo many can be wrong, cause it can't be me just ask the wife.
Keep the wind in your face and the sun at your back.

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: Which end for a nocking groove
« Reply #1 on: July 25, 2011, 06:47:00 PM »
It wouldn't make any difference really. But I think most folks are more comfortable with stringing their bows upright........Art

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: Which end for a nocking groove
« Reply #2 on: July 25, 2011, 06:56:00 PM »
If you put it on the bottom, you have to string it up lefthanded. top limb is for righties.
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: Which end for a nocking groove
« Reply #3 on: July 25, 2011, 07:11:00 PM »
dv, why does it matter left or right if you are holding it horizontal to use a stringer. Not sure what I am missing here.
Keep the wind in your face and the sun at your back.

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Which end for a nocking groove
« Reply #4 on: July 25, 2011, 08:57:00 PM »
It's OK to be a little different.
Take a kid hunting!

TGMM Family of the Bow

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: Which end for a nocking groove
« Reply #5 on: July 25, 2011, 09:03:00 PM »
i put mine in the top , as i always tie a bowyers knot on the bottom, and leave the loop to slide down over the top limb

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: Which end for a nocking groove
« Reply #6 on: July 25, 2011, 10:30:00 PM »
I think it has something to do with gravity. Especially important during the moon phases during the rut. Will the bow be used during the rut? If so I'd definitely put it on the bottom limb so the bow points up when you string it. If you're just using it for target them the top so it points down when stringing... Or maybe I'm reveresed. Roy will know, or maybe semo.
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Which end for a nocking groove
« Reply #7 on: July 25, 2011, 10:32:00 PM »
I thinkDVS was funnin ya.
You could do like Mr. Ed Scott and slip the string out of the top limb grooves and then stand the bow upside down so the string stays hanging free.
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: Which end for a nocking groove
« Reply #8 on: July 25, 2011, 10:56:00 PM »
I talked to your wife this morning about this. She said you wuz goofy, I stuck up for ya and told her ya wuz only half goofy:) But DVS is goofy:) Real Trad bowyers just use duct tape to hold their strings on...   :)  

But I only use one groove and use a bow stringer to string my bows up. It's hard enough for me to get two straight string grooves, let alone a third:)

Offline 4est trekker

  • Trad Bowhunter
  • **
  • Posts: 1393
Re: Which end for a nocking groove
« Reply #9 on: July 25, 2011, 11:05:00 PM »
I've done them on both.  I don't have a preference, as I store my bows horizontally and use a string keeper.  Lately, I've been putting them on both nocks, which I find is a little easier and safer. I'm glad you're looking into this, though.  It sure it a lot better for you bow, provided you do it right.  Just my $0.02, for what it's worth...   :)
"Walk softly...and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Re: Which end for a nocking groove
« Reply #10 on: July 25, 2011, 11:27:00 PM »
I'm not getting involved in this one, but I agree DVS is goofy but so is Roybert. So I guess it kinda evens out.   :knothead:    :goldtooth:
~Varitas Vos Liberabit~ John 8:32

Offline Shaun

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3619
Re: Which end for a nocking groove
« Reply #11 on: July 25, 2011, 11:58:00 PM »
If you use step through or push/pull, the bow will be right way up if you string to the top nock.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©