Author Topic: Arrow question, selfbow and aluminum?  (Read 723 times)

Offline Osagetree

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3512
Arrow question, selfbow and aluminum?
« on: August 21, 2011, 07:29:00 AM »
Sold a selfbow ($100.00) to a guy who wants to shoot aluminum arrows. He asked what size and I have no clue. The 70" osage self bow is about 65# at 28",,,, can anyone advise?

First one I've sold in years and would not have if my kids hadn't needed the money badly....
>>--TGMM--> Family of the Bow

Offline Furtaker

  • Trad Bowhunter
  • **
  • Posts: 122
Re: Arrow question, selfbow and aluminum?
« Reply #1 on: August 21, 2011, 07:59:00 AM »
If it were me I would try 2016s first.
A fella at our club shoots those out of his self bow.You might have to play around with the length to get them to spine right.He draws 27" and I think he shoots a 29" arrow.
2018s may do it for you too.
...........
  Frank

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Arrow question, selfbow and aluminum?
« Reply #2 on: August 21, 2011, 08:03:00 AM »
Joe just save some time and sell hims some good cane or hard wood shafts to go with them.  :)
It should be the same that your would shoot form any 65# bow but I don't remember what I uses to shoot.

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: Arrow question, selfbow and aluminum?
« Reply #3 on: August 21, 2011, 12:05:00 PM »
I would suggest the 2018, also. But if he does draw the full 65lbs, may want to try 2117!

This is what I shoot out of my 55-60 lb. selfbows, when I do shoot alum. Mostly, for the extra weight for hunting.

Dang, 100.00, I'd paid 150.00!  :D

Wood is good.. but Rivercane Rules!

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Arrow question, selfbow and aluminum?
« Reply #4 on: August 21, 2011, 12:13:00 PM »
I have never shot alum arrows from a selfbow but a good starting point would be 10# spine weight under the draw weight for a 28" arrow however that works out. I think I'd leave them long to begin with and reduce the length until I got good arrow flight.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline okie64

  • Trad Bowhunter
  • **
  • Posts: 761
Re: Arrow question, selfbow and aluminum?
« Reply #5 on: August 21, 2011, 03:25:00 PM »
2018s should do the trick.

Offline Dan Landis

  • Trad Bowhunter
  • **
  • Posts: 1145
Re: Arrow question, selfbow and aluminum?
« Reply #6 on: August 21, 2011, 06:15:00 PM »
I've shot 2018's through my 60# self bows.  Mine were cut to 29" and I was using 250 grain points.  If arrows are left a little longer as Pat suggests, you wouldn't need as much point weight.....Dan

Offline Osagetree

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3512
Re: Arrow question, selfbow and aluminum?
« Reply #7 on: August 21, 2011, 07:59:00 PM »
Okay guy's thanks... He didn't show up today with the money so maybe he changed his mind?

I knew you guy's would have a good starting point though,,,,, THANKS!
>>--TGMM--> Family of the Bow

Offline Living_waters

  • Trad Bowhunter
  • **
  • Posts: 392
Re: Arrow question, selfbow and aluminum?
« Reply #8 on: August 22, 2011, 08:11:00 AM »
I have 3 skinny aluminum composite arrows, that a guy gave me. they are the best lying arrows I have for a 55lb selfbow. I have no idea who makes them or what size they are the only problem I have found with them is they have glue on points that are hard to keep on. another good thing about them they are indestructible.
This testimony is from some one that considers anything other than wood shafts as almost sacrilege.
"Whoever believes in me, as the Scripture has said, ‘Out of his heart will flow rivers of living water.'” Jesus

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©