« previous next »
Pages: [1]   Go Down

Author Topic: Lets talk bow finshes for Glass bows  (Read 505 times)

Offline jtwalsh62

  • Trad Bowhunter
  • **
  • Posts: 420
Lets talk bow finshes for Glass bows
« on: October 20, 2011, 08:34:00 AM »
What do you like and why and how long have you used it
Logged
jt walsh
 be still and listen

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Lets talk bow finshes for Glass bows
« Reply #1 on: October 20, 2011, 10:44:00 AM »
wipe-on polly is good, requires a little work, apply 4-6 coats, sanding between coats to get a hard glass like finish. Krylon Crystal spray if you don't want to do much work, Makes a very nice durable finish with little effort.
Logged
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline mater

  • Trad Bowhunter
  • **
  • Posts: 419
Re: Lets talk bow finshes for Glass bows
« Reply #2 on: October 20, 2011, 11:51:00 AM »
Ive built bows for about 12-15 years. Used both fullerplast and thunderbird with good results. Ive tryed polys and auto finishes also. They all work. Just experiment and find what you like. Ive been using fullerplast lately because it dries quick and I like the look.

  Mark
Logged

Offline T Folts

  • Trad Bowhunter
  • **
  • Posts: 1922
Re: Lets talk bow finshes for Glass bows
« Reply #3 on: October 20, 2011, 06:52:00 PM »
I've use ML campbel Krystal and true oil, but am going to start using Thunderbird. The Krystal is easy to use but not durable enough for me.
Logged
US ARMY 1984-1988

Offline StoneAK

  • Trad Bowhunter
  • **
  • Posts: 432
Re: Lets talk bow finshes for Glass bows
« Reply #4 on: October 20, 2011, 09:28:00 PM »
What kind of sprayer are you guys using for your thunderbird?
Logged
"He never promised that the cross would not be heavy and the hill wouldn't be hard to climb"
"I don't want to gain the whole world, and lose my soul"

10 Year Active Army Disabled Vet.

Offline mater

  • Trad Bowhunter
  • **
  • Posts: 419
Re: Lets talk bow finshes for Glass bows
« Reply #5 on: October 20, 2011, 09:40:00 PM »
I use a touch up gun for auto use.  Mark
Logged

Offline Cupcake

  • Trad Bowhunter
  • **
  • Posts: 291
Re: Lets talk bow finshes for Glass bows
« Reply #6 on: October 21, 2011, 12:42:00 AM »
I really like Thunderbird; it is a very tough finish.  2 coats of gloss and then a final coat of flat is my standard finish.  Just put the last coat on one tonight.  One of these days i will do all gloss, the stuff is really shiny.

I used to us a Paasche airbrush but now use a $14 touch-up sprayer I bought at Harbor Freight.  It works great and the price is just silly.  I have found that I like about 25psi or maybe even a little lower than that.
Logged

Offline ckanous

  • Trad Bowhunter
  • **
  • Posts: 1099
Re: Lets talk bow finshes for Glass bows
« Reply #7 on: October 21, 2011, 07:44:00 PM »
Hey T Folts, is the Thunderbird a 2 part finish like the Krystal. I have used the Krystal on a few board bows I have done and plenty of cabinets in my shop and really liked it.
Logged

Offline StoneAK

  • Trad Bowhunter
  • **
  • Posts: 432
Re: Lets talk bow finshes for Glass bows
« Reply #8 on: October 21, 2011, 07:53:00 PM »
I ordered the gallon size kit of thunderbird today I am really impressed with the customer service I got from them. I have a nice touch up sprayer so thank you for the insight guys.
Thunderbird has three parts an epoxy and a finish that you mix and let stand for 30 minutes then you add the thinner and spray away. It dries really good from what I am told on exotic oily woods if you just use some acetone before finishing to draw out the oils. Then spray it the chemical reaction helps the drying process
Logged
"He never promised that the cross would not be heavy and the hill wouldn't be hard to climb"
"I don't want to gain the whole world, and lose my soul"

10 Year Active Army Disabled Vet.

Offline Blkbird

  • Trad Bowhunter
  • **
  • Posts: 162
Re: Lets talk bow finshes for Glass bows
« Reply #9 on: October 21, 2011, 08:02:00 PM »
Logged

Offline BigJim

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 3299
Re: Lets talk bow finshes for Glass bows
« Reply #10 on: October 21, 2011, 11:00:00 PM »
check out my website for buffalo hide finish. Exactly the same as TB except generally guicker service and competitively priced.

Bigjim
Logged
http://www.bigjimsbowcompany.com/      
I just try to live my life in a way that would have made my father proud.

Offline dave j

  • Trad Bowhunter
  • **
  • Posts: 2
Re: Lets talk bow finshes for Glass bows
« Reply #11 on: October 30, 2011, 10:43:00 PM »
There is a rumor going around that Thunderbird Endurance Epoxy finish is no longer available.  I want to let you know this rumor is false:  I have a lot of stock on hand and two different manufacturers to continue the exact same formula as before.  Biggest change with Thunderbird is the phone number. ATT killed the 812 847 1995 number but you can order from web or from 812 699 1099.
Logged
Thunderbird Traditional Archery
Dave  and Dianne Johnson
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©