Author Topic: Joining short glass  (Read 390 times)

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Joining short glass
« on: November 04, 2011, 12:11:00 PM »
Has anyone succesfully joined two pieces of glass on the back of a R/D longbow?
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: Joining short glass
« Reply #1 on: November 04, 2011, 12:42:00 PM »
With an overlay it shouldn't be a problem but I'm a wood bow maker so take what I say with a grain of salt.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: Joining short glass
« Reply #2 on: November 04, 2011, 05:07:00 PM »
How long is the bow and how short are the pieces of glass?
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Joining short glass
« Reply #3 on: November 04, 2011, 05:35:00 PM »
4' kids bow, 2 two foot peices of glass with an overlay.
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6065
Re: Joining short glass
« Reply #4 on: November 04, 2011, 07:55:00 PM »
Join them in the center of the riser only. Grind them at the same angle 45 or less Ca glue them in the grind so they dont slip apart on you at glueup.
High on Archery.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©