Author Topic: 62" Mild R/D- phenolic riser LB (Read 959 times)

bjansen · « **on:** December 29, 2011, 10:50:00 AM »

A while back, I asked if anyone had the Bingham Mild R/D plans and Dwillo sent me his plans. I quickly built the form and have been very slow finishing the bow. I put the final coat of thunderbird on last week and just finished it with string and rest today.

This is a Bingham Mild R/D bow, which I added 1" of reflex to when I built the form (simply by dropping the outer sides of the template down 1" when routing the form).

I used black glass, 3 actionboo 72" lams, 1 core-tuff carbon and white tip wedges. The tip overlays are clear glass, white and black glass and the riser is solid phenolic. The bow turned out to be 50# @ 28" and is 62" long.

This will be my PBS donation bow for the upcoming March banquet.

Here are a few pics.

bjansen · « **Reply #1 on:** December 29, 2011, 10:51:00 AM »

Igor · « **Reply #2 on:** December 29, 2011, 10:58:00 AM »

Love the clean lines especially in black...your finish work looks awesome...anyone would be proud to own it and it should bring a great bid price...good on you!

><>

Glenn

Buemaker · « **Reply #3 on:** December 29, 2011, 11:56:00 AM »

Very nice bow and now we also know what your car and house looks like Bue--. LOL

Glunt · « **Reply #4 on:** December 29, 2011, 12:33:00 PM »

Sharp! Very classy look. How does she shoot?

Hoss · « **Reply #5 on:** December 29, 2011, 12:36:00 PM »

Sweet looking bow! Purely simple and beautiful!

bjansen · « **Reply #6 on:** December 29, 2011, 02:10:00 PM »

It shoots quite well, I was out there this morning taking some shots with the newly finished string. The brace height looks really high in the strung pics,but it is at about 7" and works well there. Thanks for the comments.

DVSHUNTER · « **Reply #7 on:** December 29, 2011, 02:39:00 PM »

Nice looking bow brad. Very clean and good looking accents.

Dmaxshawn · « **Reply #8 on:** December 29, 2011, 02:43:00 PM »

You must have been on vacation filling the freezer Instead of in the shop. You made up for it with that one. Very classy A's usual Brad. Always look forward to seeing your bows.

Shawn

Thadbow · « **Reply #9 on:** December 29, 2011, 04:37:00 PM »

That bow is just awesome! Great work

JJB · « **Reply #10 on:** December 29, 2011, 05:31:00 PM »

Very clean and classy looking, great work!
-Jay

jsweka · « **Reply #11 on:** December 29, 2011, 06:05:00 PM »

Nothing like the simple lines of a longbow.

WELL DONE!!

Trux Turning · « **Reply #12 on:** December 29, 2011, 06:38:00 PM »

Awesome Bow!!! Your attention to detail is second to none.

kennym · « **Reply #13 on:** December 29, 2011, 06:45:00 PM »

Nicely done Buddy!!

Where is the full draw shot? It's required ya know! :D

bjansen · « **Reply #14 on:** December 29, 2011, 06:51:00 PM »

I know it is Kenny..I didn't get one and I forgot the rules. I can assure you it is a seamless arc though!

kennym · « **Reply #15 on:** December 29, 2011, 07:40:00 PM »

It looks really good braced!

Reckon you will make Mojam this time?

coaster500 · « **Reply #16 on:** December 29, 2011, 07:48:00 PM »

Excelent work... very clean lines

bjansen · « **Reply #17 on:** December 29, 2011, 08:18:00 PM »

I am really hoping to make it this year Kenny. Hopefully the timing will work out better, but last year I was in Iowa working until Friday night and just couldn't make it down. Ideally, I would like to make it down to Marshall on Wed night or Thursday morning so I can get at least a couple good days out in the heat.

jess stuart · « **Reply #18 on:** December 29, 2011, 08:22:00 PM »

You did good Brad, that is one nice looking bow.

GREG IN MALAD · « **Reply #19 on:** December 29, 2011, 08:39:00 PM »

That is a nice looking bow Brad.
How much mass weight did the phenolic riser add? I have been wanting to add some weight to a longbow without going to a solid glass riser.

News:

Author Topic: 62" Mild R/D- phenolic riser LB (Read 959 times)

Users currently browsing this topic: