Author Topic: missed weight  (Read 431 times)

Offline Pete W

  • Trad Bowhunter
  • **
  • Posts: 951
missed weight
« on: February 10, 2012, 10:12:00 AM »
I just came in with a finished weight a couple pounds lighter than I wanted. How much weight can I gain by shortening the tips 1/2" on a 65" piramid design HHB bow that is 48@28 now?
 Because the limbs taper the whole limb will need to also be taken down on the sides as well as the tips. Will taking down the sides just cancel out shortening the length?

The limbs are equal length now , can I work the lower limb only?

I hate finding the weight is low  after the finish is on.
Share your knowledge and ideas.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: missed weight
« Reply #1 on: February 10, 2012, 10:18:00 AM »
Pete, what wood are you using? You can add a few pounds by tempering the belly and/or flipping the tips a bit.
  If you shorten the tips you don't have to remove much side wood to even out the profile. I doubt you'd loose too much by doing it.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: missed weight
« Reply #2 on: February 10, 2012, 10:27:00 AM »
when i have piked a bow, i have usually just retapered the last 8 - 10" or so, that kept the wood in the limbs, but reduced the tip weight.
but what pat says is true- there is not very much wood to remove anyway.
but, again(!!!) as pat says , flipping the tips works really well, and it also adds another whole aesthetic dimension to the bow.

Offline Nim-rod

  • Trad Bowhunter
  • **
  • Posts: 243
Re: missed weight
« Reply #3 on: February 10, 2012, 11:28:00 AM »
Pete, if the bow is for me just send it light ;-)
What's a couple pounds anyways?
Proud to be "regressing"

Offline Pete W

  • Trad Bowhunter
  • **
  • Posts: 951
Re: missed weight
« Reply #4 on: February 10, 2012, 12:02:00 PM »
I think I have a plan .
 Keep it for me  and build another one.I realy like how this bow shoots, and don't want to mess it up. If it didn't already have a finish on it  I would be more inclined to tinker, but the more I think about it the more I fear getting into trouble  and ruining a good bow.
Share your knowledge and ideas.

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: missed weight
« Reply #5 on: February 10, 2012, 12:47:00 PM »
puuurrrfek excuse to build another one!!!

Offline SportHunter

  • Trad Bowhunter
  • **
  • Posts: 1684
Re: missed weight
« Reply #6 on: February 10, 2012, 01:00:00 PM »
Sounds like a great plan. Keep the shooter.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: missed weight
« Reply #7 on: February 10, 2012, 02:38:00 PM »
Do we really need excuses to build another one? I know I sure don't LOL

 Just don't tell my wife I said that cause if I keep coming up with excuses to build another then she lets me slide.

 Ahhh! Who am I kidding she knows me better than that LOL
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline Dmaxshawn

  • Trad Bowhunter
  • **
  • Posts: 1708
Re: missed weight
« Reply #8 on: February 10, 2012, 03:28:00 PM »
I like missing weight sometimes then I get to keep them around the shop longer.   I like to shoot them and look at them and hunt with them and shoot them some more.  Well you get the point.  

Too bad you came in light.  Dang the luck you get to build another one.  

Shawn

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©