Author Topic: BBI finish?  (Read 441 times)

Offline jtbluefeather871

  • Trad Bowhunter
  • **
  • Posts: 118
BBI finish?
« on: March 06, 2012, 08:58:00 PM »
What sort of finish should I use on my BBI?   :dunno:
I learned "Semper Fi" as a Marine, and have lived it every day since.

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15019
Re: BBI finish?
« Reply #1 on: March 06, 2012, 10:43:00 PM »
I use Tru-Oil on all my bows.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline jtbluefeather871

  • Trad Bowhunter
  • **
  • Posts: 118
Re: BBI finish?
« Reply #2 on: March 07, 2012, 12:46:00 AM »
Thanks Pat. I'll give it a try.
I learned "Semper Fi" as a Marine, and have lived it every day since.

Offline vanillabear?

  • Trad Bowhunter
  • **
  • Posts: 748
Re: BBI finish?
« Reply #3 on: March 09, 2012, 06:10:00 PM »

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: BBI finish?
« Reply #4 on: March 09, 2012, 07:27:00 PM »
Shellac or super glue if ya got it. Super glue spreads easier and farther than you think it would. I have used spray Helmsman on ipe before with good luck as well.

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: BBI finish?
« Reply #5 on: March 09, 2012, 09:31:00 PM »
i have used a water based satin verathane- the high gloss products are actually a lot harder- when i have used them, i rub down with fine steel wool- to satin it.

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: BBI finish?
« Reply #6 on: March 10, 2012, 10:16:00 AM »
Tip..........

If you use super glue and spread it with your fingers, keep them moving and have plenty of venelation. The fumes are a killer and fingers stuck to the riser ain't much fun either.

James
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline psychmonky

  • Trad Bowhunter
  • **
  • Posts: 490
Re: BBI finish?
« Reply #7 on: March 10, 2012, 10:30:00 AM »
Lol is that where the expression "bow shot like it was extension of my arm" came from?!
If you're gonna be dumb, you gotta be tough.

Offline OzarkMatt

  • Trad Bowhunter
  • **
  • Posts: 44
Re: BBI finish?
« Reply #8 on: March 26, 2012, 01:00:00 PM »
You may have trouble with the Tru-Oil not wanting to dry on ipe. A lacquer or shellac should do the trick. I wouldn't recommend super glue though, to risky imho. I've had good luck with Deft spray lacquer and I know some people swear by it. Use whatever works for you and post some pics, I'm sure it'll be a beauty.    :thumbsup:
Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others - Thomas Jefferson

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©