Author Topic: has anyone used the Bingham "pronounced"take down prints  (Read 561 times)

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
has anyone used the Bingham "pronounced"take down prints
« on: August 24, 2012, 02:36:00 PM »
Well what are your thoughts.how good was the design.how did it shoot.were you satisfied.what would you alter if your were gonna build another from that basic design. I am about to build one and want to get your input.
Thanks guys!

Offline stringstretcher

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2031
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #1 on: August 24, 2012, 04:39:00 PM »
I am in the same boat as you.  I just finished my form and have a all wood laminate limb in there now curing so I can see the profile and any flaws before going to glass.  Good luck with yours.
 
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me [some] venison

TGMM Family Of The Bow

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #2 on: August 24, 2012, 09:07:00 PM »
you too bud

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #3 on: August 24, 2012, 09:09:00 PM »
im trying it with carbon...we'll see....

Offline Dmaxshawn

  • Trad Bowhunter
  • **
  • Posts: 1708
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #4 on: August 25, 2012, 09:15:00 PM »
It's a good shooing bow.

Offline T Folts

  • Trad Bowhunter
  • **
  • Posts: 1922
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #5 on: August 26, 2012, 06:35:00 AM »
It is a very good proven design.
US ARMY 1984-1988

Online PV

  • Trad Bowhunter
  • **
  • Posts: 918
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #6 on: August 26, 2012, 03:03:00 PM »
It is a good design IMO. When using a carbon back I drop the stack 20-25% to get the same weight with a glass back

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #7 on: August 26, 2012, 09:05:00 PM »
sorry could you clearify what you mean about dropping the stack

Online PV

  • Trad Bowhunter
  • **
  • Posts: 918
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #8 on: August 27, 2012, 08:16:00 AM »
stack = total thickness of lams,fiberglass/carbon.

I measure mine at the butt of the lams.
For a 62" Binghams pronounced T/D on my form:
 .310 stack with glass = 50 #
 .250 stack with carbon back = 50#

Offline NormanDale33

  • Trad Bowhunter
  • **
  • Posts: 297
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #9 on: August 27, 2012, 12:26:00 PM »
I am just finishing my first bow from there designs and found small inconsistencies in the drawings, but if you measure everything yourself you should be fine. It is a lot of work to get it right but, it has been fun. You are brave going with carbon right a way! Look forward to seeing your progress.
Show me your ways, LORD,teach me your paths. Guide me in your truth and teach me,for you are God my Savior,and my hope is in you all day long.

Psalms 25:4-5

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
Re: has anyone used the Bingham "pronounced"take down prints
« Reply #10 on: September 03, 2012, 03:05:00 PM »
thank you so much guys!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©