« previous next »
Pages: 1 [2]   Go Down

Author Topic: Swing Jig?  (Read 868 times)

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Swing Jig?
« Reply #20 on: February 21, 2013, 09:35:00 PM »
That is exactly what I am looking to do Heartland! Those look amazing!!!
Logged

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Swing Jig?
« Reply #21 on: February 21, 2013, 09:37:00 PM »
How long of a pivot did you go out to... meaning how many holes did you drill and what is the spacing?
Logged

Offline heartlandbowyer

  • Trad Bowhunter
  • **
  • Posts: 664
Re: Swing Jig?
« Reply #22 on: February 21, 2013, 09:43:00 PM »
Justin I drilled out to 36 inches. These will be take down risers they are 12.5 inches long with a 19 and 13 inch radius.
Logged

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Swing Jig?
« Reply #23 on: February 21, 2013, 10:22:00 PM »
Oh ok... I can handle making one of these jigs tomorrow! My first bow is going to have an 18 inch riser following Kenny's form. I hope to be in business by next week with ordering all my wood from the master. You guys are all the best an as our spokesman "Ol Fart Roy" says... there is not better community or group of guys as there are here on TG! Truly a blessing to be cyber friends with all of ya...
Logged

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Swing Jig?
« Reply #24 on: February 21, 2013, 11:10:00 PM »
I have about 20 of those clamps from H.Freight..they work well and seem to be tough.  
Logged

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Swing Jig?
« Reply #25 on: February 23, 2013, 02:57:00 PM »
So I attempted really hard to make my own version of a swing jig. Hopefully it will work... I am done READ IT... DONE with jig, form, oven, anything of the sort kinda building now!!!

IT IS TIME TO START MY FIRST BOW!!!!

Pictures of my jig

 
 
 
 

I made the arm of the jig so that I can line the holes up an inch from the blade and also against the blade depending on what the cut will need or where in the blank I want it...

Comments are welcomed... Thanks guys for all the pictures and help to get this thing done! You all are great friends and couldn't even imagine trying to start this craft without you all and without this community on TG/PA!

Justin
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17317
Re: Swing Jig?
« Reply #26 on: February 23, 2013, 03:13:00 PM »
COOL !! I have a centerline mark on mine to line up w/ center of riser....
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20641
Re: Swing Jig?
« Reply #27 on: February 23, 2013, 04:18:00 PM »
Looks very well constructed, Justin.
Logged

Offline MoeM

  • Trad Bowhunter
  • **
  • Posts: 491
Re: Swing Jig?
« Reply #28 on: February 23, 2013, 04:30:00 PM »
Usefull- thank u guys!
Just mounted my new bs this evening^^
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17317
Re: Swing Jig?
« Reply #29 on: February 23, 2013, 05:05:00 PM »
Quote
Originally posted by Roy from Pa:
Looks very well constructed, Justin.
Who are you and what have you done with the real Roy?  :saywhat:
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20641
Re: Swing Jig?
« Reply #30 on: February 23, 2013, 05:59:00 PM »
Ya took yer smart A$$ pill today didn't cha McKenzie?   :laughing:
Logged
Pages: 1 [2]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©